Whirlpool 6AWTW5700XW1 Kullanım ve Bakım Kılavuzu - Sayfa 6

Yıkayıcı Whirlpool 6AWTW5700XW1 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 6AWTW5700XW1 20 sayfaları. Top-loading high efficiency low-water washer

SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
EST TIME REMAINING DISPLAY
6
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Overloading, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
NOTE: Not available on Model 6AWTW5550XW1
CYCLE OPTIONS
7
You may also add or remove options for each cycle. Note
that not all options can be used with all cycles, and some
are preset to work with certain cycles.
DEEP CLEAN
This option provides enhanced cleaning action for tough
stains and full loads. It will add additional agitation and
soak time to the cycle, enabling larger loads to have time
to move.
DELAY WASH
If you would like to set your washer to start at a preferred
time, select the Delay Wash option. You can use this
option to delay start of a wash cycle for up to 9 hours
(depending on model). Press DELAY WASH button once
to delay 1 hour. If you want a longer delay period, press
and hold the button until your desired delay time (in hours)
shows in the Estimated Time Remaining display, up
to 9H. Then press START/Pause/Unlock to set the delay.
The countdown to the wash cycle will show in the
display window.
ECOBOOST
The EcoBoost option allows you to increase your energy
savings on your wash cycles. When this option is used,
the wash cycle will use slightly cooler wash water than
the selected temperature. The indicated temperature will
not change.
PRESOAK
Use this option to add an extra soak period to any cycle
when washing heavily soiled garments. You can adjust the
length of the soak period by changing the Soil Level.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
NOTE: If you use cold wash and "HE" powdered
detergents we recommend to select this option to avoid
detergent residue on you clothes.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
CYCLE SIGNAL
Use this option to adjust volume of the signal that sounds
at end of cycle. You may select Loud, Soft, or Off (no
indicator lit). A louder signal is helpful in removing items
as soon as cycle is complete.
To turn button sounds on or off (on some models):
Press and hold Cycle Signal for 3 seconds to turn the
button sounds off or on.
NOTE: Not all options are available on
Model 6AWTW5550XW1
6
CYCLE STATUS LIGHTS
8
The Cycle Status Lights shows the progress of a cycle. At
each stage of the process, you may notice sounds or pauses
that are different from traditional washers.
SENSING
When the START/Pause/Unlock button is pressed,
the washer will first perform a self-test on the lid lock
mechanism. You will hear a click, the basket will make
a slight turn, and the lid will unlock briefly before
locking again.
Once the lid has locked the second time, the washer
will slowly spin the dry load to estimate the load size and
amount of water needed, and begin adding water. The
washer will then move the load briefly, pause to allow
water to soak into the load, and resume adding water.
This process may repeat until the correct amount of
water has been added for the load. You may also hear
water flowing through the dispenser, adding detergent
to the load.
NOTE: The sensing light may also come on during the
Soak and Wash portions of the cycle. This is normal.
SOAK
This portion of the cycle allows water to soak into the load
for optimal cleaning.
NOTE: Not available on Model 6AWTW5550XW1
WASH
You will hear the washplate moving the load. Unlike
traditional washers, the load is not covered with water.
Low-water cleaning means concentrated cleaning.
Rather than diluting detergent as done in an agitator-style
washer, this washer delivers the detergent directly to the
soils. The motor sounds may change at different stages
in the cycle. The wash time is determined by the selected
soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. Fabric softener will be
added if the Fabric Softener option was selected. Some
cycles use spray rinsing.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed.
DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCK
To allow for proper load sensing and spinning,
the lid will lock and the Lid Lock light will turn
on. This light indicates that the lid is locked
and cannot be opened.
If you need to open the lid, press
START/Pause/Unlock. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press
START/Pause/Unlock again to resume
the cycle.