BACOU USA SAFETY Survivair TWENTYTWENTY HEADNET 962270 Procedimientos de instalación y orientación
Navegue en línea o descargue pdf Procedimientos de instalación y orientación para Equipos de seguridad BACOU USA SAFETY Survivair TWENTYTWENTY HEADNET 962270. BACOU USA SAFETY Survivair TWENTYTWENTY HEADNET 962270 3 páginas.
Imprimir páginaT E C H N I C A L B U L L E T I N
T E C H N I C A L B U L L E T I N
T E C H N I C A L B U L L E T I N
T E C H N I C A L B U L L E T I N
#101
December 3, 1997
TWENTYTWENTY
INSTALLATION AND ORIENTATION PROCEDURES
This Technical Bulletin provides the procedures necessary to verify the proper attachment
configuration and orientation of the 962270 Headnet Kit on TwentyTwenty-style facepieces.
The proper attachment configuration and orientation of the three upper straps is essential to
assuring the proper fit of the Headnet.
INSPECTION
Read the attached installation instructions, paying particular attention to Section VI,
INSTALLATION, items 2, 3 & 4 and Figure 1, Top Straps Installation. Compare the installation
of your Headnet to the one shown in Figure 1 to verify proper installation of the Headnet. If the
installation of your Headnet differs from that shown in Figure 1, remove the Headnet and
reinstall following the installation instructions and all Warnings, Cautions, and Notes.
ATTACHMENT: Installation Instructions
-STYLE FACEPIECE HEADNET
*****WARNING*****
Remove the top three buckles and buckle
straps from the facepiece prior to installation.
Failure to do so will adversely affect the fit of
the facepiece after the Headnet has been
installed. Poor facepiece fit could cause the
wearer to inhale contaminants, resulting in
illness or death.
PAGE 1 OF 3