BACOU USA SAFETY Survivair TWENTYTWENTY HEADNET 962270 Procedimientos de instalación y orientación - Página 2

Navegue en línea o descargue pdf Procedimientos de instalación y orientación para Equipos de seguridad BACOU USA SAFETY Survivair TWENTYTWENTY HEADNET 962270. BACOU USA SAFETY Survivair TWENTYTWENTY HEADNET 962270 3 páginas.

Imprimir página
TwentyTwenty
Facepiece Headnet
Installation Instructions
I.
INTRODUCTION
This
instruction
sheet
procedures for SURVIVAIR's TwentyTwenty
Kit. This installation may be performed by users and/or a
SURVIVAIR certified technician.
understand this instruction sheet and be properly trained
before attempting installation or operation of this device.
*****WARNING*****
The Operation Instructions supplied with
this kit must be provided to the user of
the modified SCBA.
NOTE
All SURVIVAIR certified technicians are required to
remain current on new procedures and parts through
SURVIVAIR's published Technical Bulletins, technical
manual revisions, and certification seminars.
II.
SAFETY PRECAUTIONS
The Warnings, Cautions, and Notes contained in this
instruction sheet have the following significance.
*****WARNING*****
Maintenance or operating procedures
and
techniques
personal injury or death if not carefully
followed.
CAUTION
Maintenance or operating procedures
and techniques that will result in damage
to equipment if not carefully followed.
NOTE
Maintenance or operating procedures and techniques or
information considered important enough to emphasize.
III.
DESCRIPTION
®
The TwentyTwenty
SCBA facepiece can be modified by
removing the facepiece headstrap and replacing it with
the Headnet supplied in kit P/N 962270.
IV.
PARTS LIST
QTY
P/N
1
962521
1
962272
1
962273
V.
TOOL LIST
No tools are required.
®
™
Kit
P/N 962270
describes
the
installation
®
Headnet
You must read and
that
will
result
in
DESCRIPTION
®
™
TwentyTwenty
Headnet
Installation Instructions
Operation Instructions
VI.
INSTALLATION
1.
Remove the existing headstrap from the
TwentyTwenty SCBA facepiece.
2.
Remove the top three buckles and buckle
straps from the upper rim.
3.
Insert the three top straps through the
™
slots in the upper rim as shown in Figure
1.
Figure 1. Top Straps Installation
4.
Pull the straps to ensure that they lock in
the slots.
5.
Route
through the bottom facepiece buckles as
shown in Figure 2.
Figure 2. Elastic Adjustment Straps Routing
6.
Leave
adjustment straps to allow them to be
pulled over your head.
VII.
TESTING
Pull on the top three straps to ensure they do not pull out
from the rim slots.
VIII.
ADDITIONAL INFORMATION
If you need additional information on any SURVIVAIR
product, consult your local distributor or contact:
SURVIVAIR, Inc.
3001 South Susan Street
Santa Ana, CA 92704
(714) 545-0410 or (800) 821-7236
FAX (800) 201-4407
IX.
WARRANT AND LIMITATION OF LIABILITY
LIMITED WARRANTY:
product to be free from defects in materials and
workmanship for 1 year from the date of purchase.
During this period, SURVIVAIR will repair of replace
defective parts, at SURVIVAIR's option. Freight charges
the
elastic
adjustment
enough
slack
in
the
®
SURVIVAIR
warrants this
PAGE 2 OF 3
straps
elastic