FIRETRACE 800095-A Manual de instalación - Página 13
Navegue en línea o descargue pdf Manual de instalación para Unidad de control FIRETRACE 800095-A. FIRETRACE 800095-A 18 páginas. Dual pressure switch module with & without bypass
Imprimir página
CAUTION
Overtightening the screws threaded into the threaded inserts can result in stripping the threaded inserts away from the box.
The use of stainless-steel screws can result in seizing of screw in the threaded insert. Leading to overtightening.
3.5.1 Direct Mounting
Holes will need to be predrilled at the mounting location to allow for screws to be threaded in from behind. Figure 10 below gives the hole location
dimensions of the threaded inserts. Appendix A also contains a printable drill guide to aid in the mounting process. Do not use stainless-steel
screws. Seizing of the screw inside the threaded insert can occur, resulting in overtightening, and the potential stripping of the threaded inserts away
from the box
Figure 11 – Threaded Insert Dimensions
3.5.2 Flange Mounting Kit
Option to attach flanges to the box to allow r the use of self-tapping screws. The flanges are secured to the module using the supplied hardware. Adjust
flange so that the lip is flush with the side of the box. Figure 12 below highlights what is provided in the Flange Mounting Kit (P/N 111152). Figure 13
below shows the flanges installed on the module.
Figure 12 – Flange Mounting Kit
DIOM 800095-A
9
7/22/2022