ALcom CL-3375 Manual del usuario

Navegue en línea o descargue pdf Manual del usuario para Teléfono inalámbrico ALcom CL-3375. ALcom CL-3375 2 páginas. Caller id digital enhanced cordless phone

Imprimir página
CALLER ID DIGITAL ENHANCED
CORDLESS PHONE
CL-3375
USER' S MANUAL
n
Congratulations
on purchasing our high quality product.
Please read the manual carefully to find out all features and how your telephone works, so you can get
the best out of your new phone.
n
Safety Precautions
To reduce the risk of electrical shock and injury, please follow these basic safety precautions before
using the phone.
1. Carefully read and observe the instructions in this manual.
2. Follow all warnings marked on the unit.
3. When cleaning, unplug the phone first, then use a damp cloth to wipe. Do not use liquid or aerosol
cleaners.
4. Do not place objects on the line cord that may cause damage.
5. Do not use this phone in wet surroundings or environments where there is a risk of explosion.
6. Avoid spilling of any liquid on the phone.
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only.
8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with
polarity symbols (this instruction is found in the installing batteries section.)
9. Use only
the batteries indicated in the User's Manual
. Never use other ordinary batteries or
conventional alkaline batteries. Otherwise this may not only cause personal injuries but also damage
to the unit.
10. Do not mix exhausted batteries with full batteries. Exhausted batteries shall not be disposed of with
the usual household waste or in a fire.
11. If you are sure you will not be going to use the handset over a month, please take out the batteries
from the battery compartment.
12. Use only
the power supply indicated in the User's Manual
.
13. Keep the phone out of the reach of children.
14. Use the phone only in the described manner.
15. Stop using the phone if it becomes damaged.
n
Unpacking
Once you have unpacked your phone, make sure that all the parts shown below are available. If any
pieces are missing or broken, please promptly call your dealer.
Base
Handset
User's manual
2 AAA Ni-MH
Adapter*
Line cord*
batteries
batteries
batteries
*
The shape of the plugs can vary according to each country's specification.
n
Phone Layout and Keys Function
Handset
Earpiece
Menu/OK key
Display
Speaker
Up/CID key
Cancel/Mute key
INT key
Redial key
Dial/Speaker key
End/Power key
Battery
Down
compartment
/Phonebook key
Alph numeric
a
cover
keys
Star key
Hash key
Microphone
Charging contacts
Base
Rear and bottom View
Charge pins
Wall mounting
screw holes
DC 9V
DC 9V
Phone
Power Jack
Line Jack
Page button
n
Keys Description
Dial/Speaker key
Make/Answer a call.
Activates the speakerphone if pressed during a call.
End/Power key
End a call.
Long press to activate power on/off, as described in par.
Turning Handset
On/Off
.
Navigation key:
Up/CID key
Scroll up through lists and menu options.
Increase the earpiece/speakerphone volume during a call.
Enter the CID book, as described in par.
CID Book
.
Down/Phonebook key
Scroll down through lists and menu options.
Decrease the earpiece/speakerphone volume during a call.
Enter the Phonebook, as described in par.
Phone Book
.
INT key
Set up an internal call to another handset.
Transfer an incoming call to another handset.
Set up a conference call with an external line and an internal handset.
Redial key
Enter the redial book, as described in par.
Last Number Redial
.
Insert a pause when pre-dialing a number.
Menu/OK key
MENU/R
Enter the menu functions in standby mode.
Confirm selections & actions.
Performs "Flash" function.
Cancel/Mute key
Return to the previous menu.
Enter to mute during a call.
Delete an incorrect character/digit.
Star key
Press and hold to turn on/off keypad lock function.
Set up a conference call, as described in par.
Calling with more than one
Handset
.
n
LCD Window Icons Description
New Call
Signal Icon
Indicates you have missed one
Indicates whether the current
or more calls.
signal
exists
or
handset is too far from the base,
Off Hook
this icon will blink on the LCD.
Indicates the line is engaged.
Keypad Lock
Hands-free
This
icon
appears
Indicates the handsfree function
keypad is locked.
is enabled.
Battery Icon
Indicates battery charge level.
n
Connecting Lines
1.
Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a
standard phone wall outlet.
2.
Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC adapter
into a standard AC wall outlet.
To phone wall outlet
n
Installing Batteries
The rechargeable Ni-MH batteries (AAA size) come with
your phone. Install the battery before using your
phone.
1.
Slide the battery cover in the direction of the
arrow and pull it out.
Notes:
2.
Insert new batteries as indicated, matching
Reversing the orientation may damage
correct polarity (+,-).
the handset.
The batteries need to be replaced if
3. T o
r e p l a c e
t h e
b a t t e r y
they do not recover their full storage
cover, slide the cover up
capacities after recharging.
until it snaps in place.
When replacing the batteries, always
use good quality Ni-MH re-chargeable
batteries. Never use other batteries or
conventional alkaline batteries.
n
Charging Handset
! Important Note
: Before initial operation,
YOU SHOULD FULLY
CHARGE THE HANDSET
for about
15
To charge the handset, you should place it on the base.
Result: When you place the handset on the base, the handset
automatically turns on.
n
Turning Handset On/Off
If the handset is successful in finding a base, the
If the handset is in power off mode, when you
p l a c e
t h e
h a n d s e t
o n
t h e
b a s e ,
i t
handset will enter the standby mode, the display
automatically turns on. To turn the handset
will show handset number or the handset name
on or off in standby mode, follow these steps:
(if you have one saved as described on par.
Name
), signal icon, battery icon and current
1.
To turn on the handset when it's off
, press
time. If the handset is unsuccessful in finding a
and hold the
key until you switch the
base, the handset will behave according to the
display on.
On power up, the handset will
Out of Range condition.
enter subscription mode and search for a
registered base. A message as shown
Note
:
below will be displayed to the user, and
When battery power is very low, if you place
the signal icon will flash.
the handset on the base, the display will
show as below.
searching
CHARGE THE HANDSET BEFORE USING.
2.
To turn the handset off
, keep the
key
pressed until the display turns off.
Basic Functions
n
Making a Call
1. Pick up the handset and press the
key.
You can enter the desired phone number in
standby mode, which allows you to make
Result: The
icon appears on the LCD.
corrections before dialing. Follow these steps:
2. Dial a telephone number.
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the
Note:
insert a pause.
You can store up to 10 telephone numbers in
memory for automatic dialing.
Note:
If you make a mistake while entering a
3. To end the call, either press the
key
or replace the handset on the base.
number, press the
last digit.
Note
:
To make a call to the last number you dialed,
2. When the number appears correctly, press
use the
Redial
feature. For details, see par.
Last Number Redial
.
the
n
Receiving a Call
When
a
new
call
is
received,
t
he
call
Result: After you hang up the call, the LCD
information will appear.
If the caller can be identified, the caller's
Notes:
phone number is displayed.
You can select the ringer volume by using
1. To answer the call, press the
key. If you
an incoming call.
have activated the Auto Answer function,
when the handset is on the base, simply lift
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after
it up to answer.
the caller's hang-up or after the parallel
2. To end the call, either press the
key or
phone had answered the call.
not.
If
the
replace the handset on the base.
n
Muting the Microphone
During
a
conversation,
you
can
temporarily
To mute your microphone, press the
when
the
switch your phone's microphone off, so that the
during the conversation. The "
other party cannot hear you.
appears on the LCD.
Example: You want to say something to another
To unmute the microphone, press the
person in the room but do not want
again. You will restore the normal condition.
the other party to hear you.
n
Adjusting Audio Volume
During a conversation, you can use the
or
You can also select the earpiece volume or
DC 9V
DC 9V
key to adjust the level of the earpiece
the speaker volume by the
(or
the
handsfree
speakerphone
one,
if
Menu under
activated) volume from
VOL1
to
VOL5
. The
HS Settings
selected volume will be displayed on the LCD.
To AC wall outlet
n
Ringer Setting
You can select your own external (from the
Result: You can select the ring tone from Melody
telephone Network) or internal (from other
handsets registered to the same base) ring
tone and adjust the volume.
1. Press the
key.
MENU/R
2. Press
or
key repeatedly to choose
6. Press the
HS SETTING
menu, then press the
MENU/R
key.
3. Press
or
key to choose
RING SETUP
,
and press the
key.
MENU/R
4. Use
or
key to choose
INT RING EXT
/
RING
, press the
key.
MENU/R
5. Press
or
key to choose
MELODY
or
VOLUME
, press the
MENU/R
key.
n
Last Number Redial
1. Press the
key in standby mode.
hours.
Result:
The LCD displays the last number you
dialed.
2. Press the
key to dial out the number.
Your phone allows you to retrieve the last 10
numbers you have dialed and recall them
quickly.
Search for and dial a number in
Redial Book
1. Press the
key in standby mode.
HS
2. If you want to scroll through the memory,
press
or
key
repeatedly until you
find out the number you want to dial.
3. Press the
key to dial out the number.
Notes
:
If no numbers are found, "
displayed.
YOU SHOULD FULLY
When the redial book is full, each time you
dial a new number, the oldest number stored
in the redial book is automatically erased.
----
n
CID Book
When
you
receive
a
call,
if
information is transmitted from the network on
which the call was made (and the caller doesn't
hide it), the caller's phone number is displayed.
Moreover, if you missed one or more calls, the
icon will appear on the LCD. If the CID
memory is full, the
icon will flash on the LCD.
OUT OF AREA
- This message will display when
someone calls from an area where the telephone
company is not offering the caller identification
key to
services or is not yet providing number delivery
to your area.
PRIVATE
- If the caller has exercised the option
to prevent his name and number from being sent,
the message will show on the LCD.
key to clear the
View and dial any of the CID numbers
1. Press the
MENU/R
key.
key.
2. Press the
key again to choose the
MENU/R
BOOK
, and if available, the numbers are
displayed. (You can also access the CID book
directly by pressing the
mode.)
displays the call duration.
3. Use
or
key
to view the numbers, you
can make a call by a press of the
can also add the entry to the phonebook.
Add CID Number to Phone Book
or
key when the phone rings with
1. Press the
MENU/R
key.
2. Press the
MENU/R
key again to choose the
BOOK
, and if available, the numbers are
displayed.
3. Use
or
key
to view the numbers. When
the desired number displays on the LCD, press
the
key to enter
ADD TO PB
MENU/R
key
CALL MUTED
"
n
Key Lock
If you turn on this feature, all keys will be locked.
key
You can answer calls by using the
when you hang up, the phone returns to the
locked mode. This feature is useful to avoid
pressing keys by mistake.
To lock the keys, in the standby mode just keep
the
key pressed till the display shows "
LOCKED
" and
the
icon.
AUDIO SETUP
in
HS SETTING
, as described in par.
.
n
Selecting a Language
The
handset
supports
multiple
languages. You can change the language used
to display the menu messages.
1. Press the
MENU/R
key.
1 to 10 or adjust the volume from Volume
2. Press
or
key repeatedly to choose
1 to 5, or off. When you adjust the ring
SETTING
, press the
key.
MENU/R
tone or volume, the phone plays the
selected melody or sounds the selected
loudness.
n
HS Name
MENU/R
key to confirm.
"HS N" is the default name of the handset after
registration of handset. The handset number N=
1 to 5 reflects the handset is the Nth handset,
which is registered to the base. The HS Label is
displayed in the standby mode. You can modify it
by the following steps:
1. Press the
key.
MENU/R
2. Press
or
key
repeatedly to choose
SETTING
, press the
key.
MENU/R
Use Redial Book options
Using the redial book options, you can add a
number to phone book or delete a number in
the redial book.
1. Press the
key.
2. Scroll to the desired number by using the
or
key
.
3. When the number appears on the display,
press the
key to choose the desired
MENU/R
option:
ADD TO PB:
allows you to add the number to the
phone
book.
Complete
storing
the
entry
by
starting from step 4 described in par."Adding the
Phone Book Entries" (obviously, you will find the
number already entered in the appropriate field).
DELETE:
allows you to delete the selected number.
DELETE ALL:
allows you to delete the whole
redial book.
4. To exit, press the
key.
EMPTY
" is
Note
:
At step 3, when you select
DELETE
or
D E L E T E
A L L
o p t i o n s ,
a
m e s s a g e
"
CONFIRM ?
" will further ask you to
confirm the deletion. To confirm press
MENU/R
Kk
K
ey, to escape press the
key.
the
caller's
4. Press the
key, you are prompted to enter
MENU/R
the name.
5. Enter the name and press the
key, then you
MENU/R
can modify the number you want to store.
6. Press the
MENU/R
key, you are able to select the
ring tone from Melody 1 to Melody 10, press
the
MENU/R
key to confirm and exit, you will hear a
confirm beep.
Delete a number in the CID Book
1. Press the
key.
MENU/R
2. Press the
MENU/R
key again to choose
CID BOOK
,
and if available, the numbers are displayed.
3. Scroll to the number you want to delete by
using
or
key.
4. When the desired number appears on the
CID
display, press the
key.
MENU/R
5. Use
or
key to choose
DELETE
, press
key in standby
the
key. The display will show "
CONFIRM
MENU/R
?
". Press the
key to confirm, you will hear a
MENU/R
beep and the LCD shows the next number.
key. You
Delete all numbers in the CID Book
1. Press the
key.
MENU/R
2. Press the
key again to choose
CID BOOK
,
MENU/R
and if available, the numbers are displayed.
CID
3. Press the
MENU/R
key and use
or
key to
choose
DELETE ALL
menu, then press the
key.
MENU/R
4. The display shows "
CONFIRM ?
", press the
key to confirm.
MENU/R
menu.
Result:
You hear a beep and the phone
returns to the standby mode after
clearing all the CID numbers.
To unlock the keys, keep the
key pressed again
key. But
till the key lock icon
disappears from the display.
Note
:
In locked mode, if you press any key, the
phone will generate a warning tone, and the
"
HS LOCKED
" message will be redisplayed.
HS
predefined
3. Use
or
key
to choose the
LANGUAGE
,
then press the
key.
MENU/R
4. The languages will be displayed. Use
or
key
to scroll through the options. Each
language will be displayed in its own native
HS
translation.
5. Press the
MENU/R
key to select the required
language and you will hear a confirm beep.
3. Use
or
key
to choose
HS LABEL
, then
press the
key.
MENU/R
4. You can enter the handset name (up to 6
characters) by using the alphanumeric keys
(use the
key to delete the previous
character if necessary), then press
key to
MENU/R
confirm and exit. The handset name will be
modified.
HS