ALcom CL-3375 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Teléfono inalámbrico ALcom CL-3375. ALcom CL-3375 2 páginas. Caller id digital enhanced cordless phone

Imprimir página
n
Auto Answer
With this feature, you can answer a call by
3. Use
or
key
to choose
AUTO ANSWER
just picking up the handset from the base
then press the
MENU/R
key.
without pressing any key.
4. Use
or
key
to choose
1. Press the
key.
MENU/R
enable/ disable the function, then press the
key, you will hear a confirm beep.
MENU/R
2. Press
or
key repeatedly to choose
HS SETTING
, press the
MENU/R
key.
n
Paging
You can page the handset from the base unit
To stop paging, press the
key on the base again
or any key on the handset.
making it ring with a special tone. It's useful to
locate a lost handset.
Note
:
Press the
key on the bottom of the base (less
On a long
key press, more than or equal to
than 5 seconds), all the handsets registered to
5 seconds, the base will enter subscription
the base will ring for about 60 seconds.
mode. For details, see par.
Registration
n
Dial Mode
You can select to change the dial mode by the
4. You can press
or
key
following steps:
required dial mode options (
TONE PULSE
press the
key. A confirm beep will be heard.
MENU/R
1. Press the
key.
MENU/R
Note:
2. Press
or
key repeatedly to choose
BS
If you are not sure which dialing mode should
SETTING
, and press the
key.
MENU/R
be selected, please contact your local service
provider.
3. Press the
key to choose the
DIAL MODE
,
then press the
MENU/R
key.
n
Handsfree
D u r i n g
a
c a l l ,
y o u
m a y
t u r n
o n
t h e
To turn the feature off, and keep on talking in
speakerphone built in the handset. In this
normal mode, press the
key again. The
mode you can simply put your handset on a
icon will disappear.
surface (e.g. a desk) and enjoy the comfort
of the handsfree conversation.
Notes
:
Before putting the handset near your ears, be
To turn the feature on
, press the
key
sure you have turned the speakerphone off.
during a call (line engaged). The
icon
To adjust the speakerphone volume, see par.
appears on the LCD.
Adjusting Audio Volume
.
n
Flash Signal
When the line is engaged, pressing the
key
To use the said special services, just press the
MENU/R
sends the Flash signal. This key is used in
key while the line is engaged: the display will show
conjunction
with
special
services
(e.g.
call
R
.
waiting) which can be available in your phone
network. For further details please contact your
network telephone company.
Advanced Functions
n
Menu Map
4. HS SETTING
1. CID BOOK
ALARM
2. PHONE BOOK
AUDIO SETUP
ADD ENTRY
RING SETUP
CHANGE ENTRY
TONE S
ETUP
DELETE ENTRY
LANGUAGE
DELETE ALL
HS LABEL
PB STATUS
AUTO ANSWER
DATE & TIME
SELECT BS
3. BS SETTING
HS DEFAULT
TERMINATE HS
DIAL MODE
FLASH TIME
5. REGISTER
MODIFY PIN
BS DEFAULT
n
Phone Book
The phonebook built in your cordless phone allows you to store frequently used numbers so that you can
easily make a call without having to remember or enter the phone number.
Character Map
To enter a specific alphanumeric character, press one or more times the relevant key for the required
character according to the following table: once for the first character, twice for the second and so on.
Key
Characters in the displayed order
0
(spc)
0
&
/
.
_
1
@
_
1
2
b
C
A
2
3
d
E
F
3
4
G
H
I
4
L
5
5
J
K
6
M
N
O
6
7
P
q
R
S
7
8
T
U
V
8
W
X
y
9
9
Z
Adding the Phone book Entries
6. Repeat if necessary.
1. Press the
MENU/R
key.
* If you want to set a VIP number, you should
select a special ring tone for it. The ring tone
2. Press the
key
to choose
PHONE BOOK
,
should be different from the external ring you
press the
key.
MENU/R
have set. You can set up to 9 VIP ring tones
3. Press
MENU/R
key again to choose
ADD ENTRY
.
associate with 9 VIP numbers/groups.
4. The display shows "
NAME ?
". Enter the name
Note:
you want to use, then press the
MENU/R
key to
If you make a mistake while entering a
confirm. The display shows "
NUMBER ?
".
number, use the
key to correct it. Each
Enter the desired number (up to 20 digits),
press the
key.
time you press the key, the last digit is
MENU/R
deleted. To clear all digits, press and hold the
5.*Use
or
key
to select the ring you like to
key.
associate with the number, press the
key
MENU/R
to confirm.
Viewing the Phone book Entries
6. Use
associate with the number, press the
1. In the standby mode, press the
key.
,
confirm.
2. Press
or
key
repeatedly until the desired
Deleting the Phone book Entries
name is displayed.
ON OFF
/
to
1. Press the
3. Press the
MENU/R
key to show the relevant number.
2. Press the
press the
Dialing a Number from Phone book
3. Press
Find out the number you want to dial. Refer to
Press the
"Viewing the Phone book Entries". Then press the
4. Press
key to dial out the number.
you want to delete displays, then press the
Editing the Phone book Entries
key. The display shows "
press the
1. Press the
key.
MENU/R
key to exit.
2. Press the
key
to choose
PHONE BOOK
,
5. At step 3, if you choose
press the
MENU/R
key.
press
3. Press the
key
to choose
CHANGE ENTRY
"
CONFIRM ?
.
menu, press the
MENU/R
key.
delete all the entries or press the
4. Press
or
key
repeatedly until the entry
exit.
you want to edit displays, press the
key to
MENU/R
PB Status
confirm.
to select the
The PB Status shows the number of phone book
5. If necessary, press the
key to clear the
/
) and
entries already stored. When the
digit(s) then enter the desired name and
shows on the LCD, press the
number, press the
key to save.
MENU/R
n
BS Settings
Terminate HS
1. Press the
This function allows you to delete a handset
2. Press
registration from the base.
SETTING
1. Press the
MENU/R
key.
3. Use
menu, press the
2. Press
or
key repeatedly to choose
BS
SETTING
menu, then press the
key.
MENU/R
4. The display shows "
enter the old PIN. If the old PIN code is
3. Press the
key again to choose
TERMINATE
MENU/R
validated, you will be prompted to enter a new
HS
. The display shows "
PIN?
" to prompt you
PIN code. If the old PIN is not validated, a
to enter the PIN Code (The default PIN Code is
warning beep will sound and you will be
"0000"). Then press the
key.
MENU/R
returned to the
4. Use the
or
key
to select a handset. If
5. Enter the new PIN, press the
you select the current handset or a non-
be requested to confirm the PIN code. Enter
existent handset, a warning tone will be heard.
the new PIN again then press the
5. Press the
MENU/R
key
to confirm, and the selected
confirm and exit.
MENU/R
handset
will
behave
according
to
the
BS Reset
unregistered condition.
This function allows you to reset the Base
Flash Time
setting to the factory default.
You can select to change the Flash time by the
1. Press the
following steps:
2. Press
1. Press the
key.
MENU/R
SETTING
2. Press
or
key repeatedly to choose
BS
3. Press
SETTING
menu, then press the
key.
MENU/R
press the
3. Use
or
key to choose the
FLASH TIME
the PIN code.
menu. Press the
key.
MENU/R
4. Enter the PIN code (the default PIN is 0000),
4. The display shows the current setting. Use the
then press the
or
key to select
SHORT LONG
/
, press
validated all Base settings will be returned
the
key.
to
the
MENU/R
settings will remain.
Modify PIN
Result:
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
n
HS Settings
Setting Alarm
2. Press
SETTING
You are able to set the alarm on the handset
and adjust the alarm settings.
3. Press the
press the
1. Press the
MENU/R
key.
4. Use
2. Press
or
key repeatedly to choose
HS
EARPIECE V
SETTING
menu, then press the
key.
MENU/R
5. The display shows the current setting. Use the
3. Press the
MENU/R
key again to choose
ALARM
.
or
4. The display shows the current set. Use the
(VOLUME 1-VOLUME 5), press the
or
key to select
ON OFF
/
, press the
Key Tone
MENU/R
key.
Every time you press a key, your handset
5. If you select
ON
, the display indicates you
acknowledges it with a key tone. You can
to enter the time in
HH MM
:
format.
disable the key tones for a silent use. In certain
error conditions, a warning tone will sound
6. Press the
MENU/R
key, a beep sounds and the
when an incorrect key is pressed.
display shows
SNOOZE ON/OFF,
you can
press
or
key
to enable or disable the
1. Press the
snooze function on the alarm and press
2. Press
the
key.
MENU/R
SETTING
7. When the alarm sounds, press any key to
3. Use
switch it off.
menu, press the
4. Press the
Notes
:
At step 5 you need to enter the time in
5. You can use
24-Hour format.
OFF
to enable or disable the function.
If you press any key at the right time the
6. Press the
alarm to ring, the alarm will be silent.
If you choose
SNOOZE ON
, the alarm will
Note:
ring at regular intervals of 10 minutes.
For normal use, we recommend you
leave the key tone enabled. This makes
Audio Setup
the phone easier to use.
You can also use the menu to adjust the audio
volume.
1. Press the
MENU/R
key.
Setting Date & Time
or
key
to select the ring you like to
key to
MENU/R
1. Date Format
1. Press the
MENU/R
key.
2. Press
or
key repeatedly to choose
key.
MENU/R
SETTING
menu, then press the
key
to choose
PHONE BOOK
,
3. Press
or
key to choose
key.
MENU/R
press the
key.
MENU/R
or
key
to choose
DELETE ENTRY
.
4. Press the
MENU/R
key to choose
DATE FORM
MENU/R
key.
or
key
repeatedly until the name
5. You can use
or
key
to choose the Date
format (
DD-MM MM-DD
/
), press the
MENU/R
save.
CONFIRM ?
". You can
key to delete it or press the
MENU/R
2. Setting date & time
DELETE ALL
menu and
1. Press the
MENU/R
key.
the
MENU/R
key,
the
display
will
show
2. Press
or
key repeatedly to choose
". You can press the
MENU/R
key to
SETTING
menu, then press the
key to
3. Press
or
key to choose
press the
MENU/R
key.
4. Press
or
key to choose
SET TIME
menu, press the
MENU/R
PB STATUS
key to enter it.
MENU/R
5. Enter the current date or time by numeric
keypad and press the
MENU/R
key to save and exit.
Note:
At step 5 you need to enter the time in 24-
Hour format.
MENU/R
key.
or
key repeatedly to choose
BS
Selecting a Base
menu, then press the
key.
MENU/R
This function allows you to select a base from
or
key
to choose
MODIFY PIN
those already registered to the handset. You can
MENU/R
key.
access the options by scrolling the menu.
PIN?
" to prompt you to
n
Registration
The supplied handset is already registered with
the number 1.
You can register up to 5 handsets
MODIFY
PIN
menu.
to your base unit in order to share the same line
with other people.
MENU/R
key. You will
Before registering a handset to the base, you
key to
MENU/R
should press and hold the
key on the bottom
of the base for about 5 seconds then release it.
1. Press the
key.
MENU/R
2. Press
or
key repeatedly to choose
REGISTER
, then press the
MENU/R
key.
3. Use
or
key
to scroll through the Base
names list, press the
key to choose a base
or
key repeatedly to choose
BS
MENU/R
menu, then press the
key.
to your necessary. The handset will search for
MENU/R
the
requested
base
and
or
key
to choose
BS DEFAULT
,
information will flash on the LCD.
key. You will be prompted to enter
MENU/R
n
Calling with more than one Handset
MENU/R
key. If the PIN code is
If you have more than one handset registered to
the same base, you can make internal calls and
factory
default,
otherwise
the
transfer an external call between the registered
handsets.
After resetting, the handset will return
Making an internal call
to standby mode.
1. Press the
key, the LCD displays as follows,
then enter the number of the handset you
want to call.
1 2 3 4 5
or
key repeatedly to choose
HS
2. If the handset entered is valid, the called
menu, then press the
key.
handset will ring and display
MENU/R
The handset user can press the
key to choose
AUDIO SETUP
,
answer the internal call.
MENU/R
key.
3. At the end of your conversation, press the
or
key to choose
SPEAKER VOL
or
key.
, press
key.
MENU/R
Note:
During the internal call, if an external call
key to choose the volume level
comes in, the LCD will show the caller's
MENU/R
key.
number. You should press the
the internal call first then press the
to answer the call.
Call transfer between handsets
You can transfer an external call between the
handsets those are registered to the same base.
key.
MENU/R
or
key repeatedly to choose
HS
menu, then press the
key.
MENU/R
or
key
to choose
TONE SETUP
key.
MENU/R
MENU/R
key again to choose
KEY TONE
.
or
key
to choose
ON
or
key.
MENU/R
Feature List
1. Press the
MENU/R
key.
1.8GHz DECT technology with GAP
2. Press
or
key repeatedly to choose
HS
Up to 5 handsets for optional for one base
SETTING
menu, then press the
MENU/R
key.
Up to 4 bases for optional for one handset
HS
Phonebook with up to 50 groups
key.
MENU/R
3. Press
or
key
to choose the
SELECT BS
,
9 VIP ring tones setting for phonebook
press the
key.
DATE & TIME
,
MENU/R
entries
Redial book with up to 10 entries
4. You can use
or
key
to select the base
10 ring tones and volume selectable (5
.
you want, then press the
key. If you select
MENU/R
levels+off)
a non-existent base, the handset will sound a
Wall mounting function
warning tone.
Key tone ON/OFF selectable
key to
MENU/R
Full handsfree speakerphone
5. The display will show
SELECT BS X
. Press the
Internal call
key to confirm. A confirm tone will be
MENU/R
Call transfer
3-way conference call
heard.
Receiver/Speaker volume adjustable (5
levels)
HS Reset
HS
Mute
This function allows you to reset the handset
PIN protection
key.
MENU/R
settings to the factory default.
Predialing
DATE & TIME
,
Redial, Flash, Pause
1. Press the
MENU/R
key.
TONE/PULSE dialing mode selectable
SET DATE
or
2. Press
or
key repeatedly to choose
HS
SETTING
menu, then press the
key.
key.
MENU/R
Troubleshooting
3. Press
or
key
to choose the
HS DEFAULT
menu, press the
key. You will be prompted
MENU/R
to enter the PIN code.
4. Enter the PIN code (the default one is 0000),
then press the
MENU/R
key. If the PIN code is
validated all handset settings will return to the
factory default, otherwise a warning tone will
be heard and the settings will remain.
Result:
After resetting, the handset will return to
standby mode.
4. If the base is found, and the handset is
successfully registered, you will be prompted
to enter the PIN code (the default one is 0000).
On
validation
of
the
PIN
code,
the
Registration tone will sound and the Base
assigns a number to the handset. If the PIN
code entered is invalid, a warning tone will
sound, and the handset will return to the
previous registration state.
5. If the base is not found, the handset will
Please attach a noise filter (contact your DSL provider) to the telephone line between the
behave
according
to
the
Out
of
Range
base unit and the telephone line jack in the event of the following:
MENU/R
key.
condition.
- Noise is heard during conversations.
- Caller ID features do not function properly.
the
relevant
1. During an external call, press the
key then
enter the number of the handset you want to
transfer the call to.
2. If the called party can answer your call, he/she
can press the
key to talk with you. At this
time you can inform him/her of the incoming
call.
Wall Mounting
3. When the called handset answers, press the
key or replace the handset to the base to
complete the transfer.
Setting up a 3-way conference call
When you have both an external call and an
HSX CALLING
.
intercom call in progress, you can set up a three-
key to
way conference call, like this:
1. During an external call, press the
key and
then the number of the handset you want to
join the 3-way call.
2. The called party press
key to answer.
3. The calling party can press the
key to start
To wall-mount your phone follow these steps:
key to end
the 3-way call.
a. Install the two self-tapping screws (not supplied) at a distance of 64mm from each other and located
key
on a horizontal line.
4. Either of the two internal handsets can press
b. Place the phone onto the screw-heads and
the
key to leave the conference call at any
time.
Note:
If one of the handsets drops the conference
call, the remaining handsets will continue the
conference.
FLASH time selectable
Call duration display
Real time clock (set time)
Keypad lock
9 languages selectable
Auto answer ON/OFF selectable
Alarm clock include snooze option
Handset Name setting
LCD backlight
Caller ID
FSK and DTMF dual system Caller ID
Caller ID list with up to 40 entries
Incoming calls can be called back/added
to phonebook/deleted
Note:
The caller ID feature is only available if you
subscribe to a Caller Display service from
your network provider.
Symptom
Check & Remedy
Check that the power adapter is properly connected.
No operation
Check that the telephone line cord is properly connected.
Check that the handset batteries in full power.
Check that the handset batteries are installed properly.
Check that the telephone line cord is properly connected.
No dial tone
Check that the power adapter is properly connected.
Check that the handset batteries are installed properly.
Nothing appears
Check that the handset batteries in full power.
on the display
Check that the handset is on.
Handset seems
Check the charge contacts.
to have very short
Consistently short battery life may indicate that replacement of the batteries is necessary.
battery life
Make sure the right batteries be used.
Make sure you have subscribed to a Caller ID service via your network provider.
Caller s number
'
The caller may have withheld their details.
is not displayed
Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
If you subscribe to a DSL service
DC 9V
DC 9V
To single-line
telephone jack
Noise filter
Screw head
Wall
slide down to secure.
THIS PRODUCT IS SUITABLE FOR USE IN
THE PUBLIC ANALOGUE NETWORK (PSTN)