3Com IntelliJack NJ200 Manual complementario - Página 7
Navegue en línea o descargue pdf Manual complementario para Hardware de red 3Com IntelliJack NJ200. 3Com IntelliJack NJ200 14 páginas. Network jacks
También para 3Com IntelliJack NJ200: Manual de software (7 páginas), Ficha de datos (4 páginas)
Imprimir página
3 C O M
®
N J 2 0 0 N E T W O R K J A C K — V L A N S & T R A F F I C P R I O R I T I Z AT I O N
Figure 5. Setting the outgoing and incoming tag
schemes assigns the PAN ports to one or more VLANs.
Outgoing Tag Scheme
1. Put a check the
Note: This setting affects both VLAN and traffic priority sorting on a bridge-wide basis.
Port 1
2. Select the
tab and from the pull-down menu, select
untagged frame
.
VLAN ID
3. Put a check in the
are now configured as part of the "VLAN 1" subnet.
4. Repeat the last two steps to configure PAN ports 3 and 4 as part of the "VLAN 2"
subnet. Click
OK
to exit configuration window.
Incoming Tag Scheme
5. Put a check in the
Note: This setting affects both VLAN and priority traffic sorting on a bridge-wide basis.
6. From the pull-down menu, select
7. Click
OK
to exit configuration window.
box.
Add tag to any
1
VLAN ID
box and type
in the
box.
Frames received are unmodified
field. PAN ports 1 and 2
.
7