3Com IntelliJack NJ200 Supplementary Manual - Page 7

Browse online or download pdf Supplementary Manual for Network Hardware 3Com IntelliJack NJ200. 3Com IntelliJack NJ200 14 pages. Network jacks
Also for 3Com IntelliJack NJ200: Software Manual (7 pages), Datasheet (4 pages)

Print Page

3 C O M

N J 2 0 0 N E T W O R K J A C K — V L A N S & T R A F F I C P R I O R I T I Z AT I O N

Figure 5. Setting the outgoing and incoming tag

schemes assigns the PAN ports to one or more VLANs.

Outgoing Tag Scheme

1. Put a check the

Note: This setting affects both VLAN and traffic priority sorting on a bridge-wide basis.

Port 1

2. Select the

tab and from the pull-down menu, select

untagged frame

VLAN ID

3. Put a check in the

are now configured as part of the "VLAN 1" subnet.

4. Repeat the last two steps to configure PAN ports 3 and 4 as part of the "VLAN 2"

subnet. Click

to exit configuration window.

Incoming Tag Scheme

5. Put a check in the

Note: This setting affects both VLAN and priority traffic sorting on a bridge-wide basis.

6. From the pull-down menu, select

7. Click

to exit configuration window.

box.

Add tag to any

VLAN ID

box and type

in the

box.

Frames received are unmodified

field. PAN ports 1 and 2