AlcoSense Excel Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba AlcoSense Excel. AlcoSense Excel 15 páginas. Breathalyser

Imprimir página

Changing Settings & Recalling Results

From the home screen, shown below, press the left hand button with the

menu icon above it. From here you will find access to previous results,

settings and system information.

Once in the menu, the left hand button will scroll down the options, the

right hand button will scroll up the options and the centre button will

select the option.

Adjusting the Time & Date

Access the main menu and select "Settings", then select the "Time &

Date" option.

Recalling Last Results

AlcoSense Excel stores your previous 24 test results. When the memory is

full the oldest record is deleted to make space for the newest record. To

review the previous results navigate to Main Menu > Last Results. Use the

up and down key to navigate through the results. The central button will

exit back out of this feature.

Changing the Screen Brightness

From the main screen press the left hand button to access the Main Menu.

Navigate to Main Menu > Settings > Brightness.

Turning the Key Beep On and Off

From the main screen press the left hand button to access the Main Menu.

Navigate to Main Menu > Settings > Key Beep.

Resetting the Unit

If you ever need to reset the unit back to factory settings navigate to

Main Menu > Settings > Advanced > Reset and follow the on screen

instructions. The calibration expiry date and your previous test results will

not be reset or deleted.

Service Menu

This option can only be accessed by AlcoSense approved service engineers.

Changing settings here will affect the accuracy of your device.

Changing Limits, Units of Measure and Driving Abroad

Changing the Drink Drive Limit

This is accessed through Main Menu > Settings > Set Limit. This will

change the point at which the AlcoSense Excel will display the don't drive

alert. Please note, the don't drive alert is displayed from 20% below your

chosen limit. For example, if the limit is set at 0.35mg/L it will display the

don't drive alert from 0.28mg/L upwards.

To check the current setting please go to Main Menu > Info and scroll

down until you see "Limit". If you wish to change the limit please go to

Main Menu > Settings > Set Limit. You can then adjust the limit up or

down as you choose.

Changing the Unit of Measure

You can change the AlcoSense's unit of measurement between blood (BAC)

or breath (BrAC) alcohol concentrations. If using a blood alcohol unit of

measure we STRONGLY recommend double checking the Blood Breath

Ratio (BBR) is set correctly first by referencing the tables at

www.alcosense.co.uk/support. The UK and Irish BBR is 2300:1. If you use

the wrong BBR your readings will display incorrectly (see section on Blood

Breath Ratio). The choice of units are:

• mg/L BrAC (milligrams of alcohol per litre of breath)

• ‰BAC (per mil Blood Alcohol Concentration)