AlcoSense Excel Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di prova AlcoSense Excel. AlcoSense Excel 15. Breathalyser

AlcoSense Excel Manuale di istruzioni
Changing Settings & Recalling Results
From the home screen, shown below, press the left hand button with the
menu icon above it. From here you will find access to previous results,
settings and system information.
Once in the menu, the left hand button will scroll down the options, the
right hand button will scroll up the options and the centre button will
select the option.
Adjusting the Time & Date
Access the main menu and select "Settings", then select the "Time &
Date" option.
Recalling Last Results
AlcoSense Excel stores your previous 24 test results. When the memory is
full the oldest record is deleted to make space for the newest record. To
review the previous results navigate to Main Menu > Last Results. Use the
up and down key to navigate through the results. The central button will
exit back out of this feature.
Changing the Screen Brightness
From the main screen press the left hand button to access the Main Menu.
Navigate to Main Menu > Settings > Brightness.
Turning the Key Beep On and Off
From the main screen press the left hand button to access the Main Menu.
Navigate to Main Menu > Settings > Key Beep.
16
Resetting the Unit
If you ever need to reset the unit back to factory settings navigate to
Main Menu > Settings > Advanced > Reset and follow the on screen
instructions. The calibration expiry date and your previous test results will
not be reset or deleted.
Service Menu
This option can only be accessed by AlcoSense approved service engineers.
Changing settings here will affect the accuracy of your device.

Changing Limits, Units of Measure and Driving Abroad

Changing the Drink Drive Limit
This is accessed through Main Menu > Settings > Set Limit. This will
change the point at which the AlcoSense Excel will display the don't drive
alert. Please note, the don't drive alert is displayed from 20% below your
chosen limit. For example, if the limit is set at 0.35mg/L it will display the
don't drive alert from 0.28mg/L upwards.
To check the current setting please go to Main Menu > Info and scroll
down until you see "Limit". If you wish to change the limit please go to
Main Menu > Settings > Set Limit. You can then adjust the limit up or
down as you choose.
Changing the Unit of Measure
You can change the AlcoSense's unit of measurement between blood (BAC)
or breath (BrAC) alcohol concentrations. If using a blood alcohol unit of
measure we STRONGLY recommend double checking the Blood Breath
Ratio (BBR) is set correctly first by referencing the tables at
www.alcosense.co.uk/support. The UK and Irish BBR is 2300:1. If you use
the wrong BBR your readings will display incorrectly (see section on Blood
Breath Ratio). The choice of units are:
• mg/L BrAC (milligrams of alcohol per litre of breath)
• ‰BAC (per mil Blood Alcohol Concentration)
17