Alcovisor Saturn Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba Alcovisor Saturn. Alcovisor Saturn 16 páginas.

P. 9

Screening Test

To perform screening test, select "On" in the "Screening" option in "Setting"

Attach a sampling cup onto the sample port.

When displays "Please Blow", take a deep breath and blow to the sampling

cup until BEEP tone stops.

"Alcohol Detected" or "No Alcohol" displays on the display.

A passive test can be performed by select "Manual" during the testee is

blowing.

Select "Retest" to start another test.

If "Alcohol Present", use mouthpiece to perform a standard test to obtain an

accurate test result with reading.

NOTE: This mode is only used for screening purpose to check whether alcohol

is found in the breath sample. An accurate test result can only be obtained

by standard test.

NOTE: This mode is disabled when connecting to the mobile phone App.

Test with Smartphone App

1. The Android and IOS mobile APP "Alcovisor Elite" can be used with the

device, compatible with Android version 4.3+ and IOS 9.0+, and the internal

bluetooth module of the mobile is 4.0+

2. Switch on the device, and open the App "Alcovisor Elite". Both Bluetooth

signal and connection signal is shown when it is successfully connected with

the App.

3. Once the device is connected with the App, the device will be controlled by the

App, all buttons on the screen will be disabled.

4. Attach a disposable mouthpiece onto the sample port.

5. Press "Tap to begin" on the mobile phone screen to start the test. The serial

number of the device will be shown on the device screen.

6. Face the mobile phone camera, make sure the face and serial number is

clearly shown on the mobile phone screen.

7. Take a deep breath and blow until BEEP tone stops.

8. Test result will be shown on both the device and the App.