Alcovisor Saturn Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Test Equipment Alcovisor Saturn. Alcovisor Saturn 16 pages.
Print Page
P. 9
Screening Test
1.
To perform screening test, select "On" in the "Screening" option in "Setting"
2.
Attach a sampling cup onto the sample port.
3.
When displays "Please Blow", take a deep breath and blow to the sampling
cup until BEEP tone stops.
4.
"Alcohol Detected" or "No Alcohol" displays on the display.
5.
A passive test can be performed by select "Manual" during the testee is
blowing.
6.
Select "Retest" to start another test.
7.
If "Alcohol Present", use mouthpiece to perform a standard test to obtain an
accurate test result with reading.
NOTE: This mode is only used for screening purpose to check whether alcohol
is found in the breath sample. An accurate test result can only be obtained
by standard test.
NOTE: This mode is disabled when connecting to the mobile phone App.
Test with Smartphone App
1. The Android and IOS mobile APP "Alcovisor Elite" can be used with the
device, compatible with Android version 4.3+ and IOS 9.0+, and the internal
bluetooth module of the mobile is 4.0+
2. Switch on the device, and open the App "Alcovisor Elite". Both Bluetooth
signal and connection signal is shown when it is successfully connected with
the App.
3. Once the device is connected with the App, the device will be controlled by the
App, all buttons on the screen will be disabled.
4. Attach a disposable mouthpiece onto the sample port.
5. Press "Tap to begin" on the mobile phone screen to start the test. The serial
number of the device will be shown on the device screen.
6. Face the mobile phone camera, make sure the face and serial number is
clearly shown on the mobile phone screen.
7. Take a deep breath and blow until BEEP tone stops.
8. Test result will be shown on both the device and the App.