aerauliqa AD1400A Manual - Página 10

Navegue en línea o descargue pdf Manual para Ventilador aerauliqa AD1400A. aerauliqa AD1400A 20 páginas. High volume circulation fans

Imprimir página

AD1400A

High volume circulation fans

INDEX

GENERAL INFORMATION

2. PRECUTIONS

3. TYPE

4. MAIN FEATURES

5. DATA

6. DIMENSIONS AND CLEARANCES

7. COMPONENTS

8. INSTALLATION

9. WIRING DIAGRAM

9.1 CTRL-A (accessory on request)

9.2 CONTROL WITH EXTERNAL POTENTIOMETER (not supplied)

9.3 CTRL-XWS (accessory on request)

9.4 CTRL-XTHI (accessory on request)

10. CLEANING

11. TROUBLESHOOTING

11.1 Connection parameters

11.2 Modbus registers - Input registers

11.3 Alarm codes / led status / troubleshooting

12. DECLARATION OF CONFORMITY AND INCORPORATION

1. GENERAL INFORMATION

Carefully read the instructions contained in this manual.

This Specific Manual MUST be read in conjunction with the "Installation, Operation and Maintance General Manual".

Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and

accessories without any obligation to update previous productions and manuals.

The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in

accordance with local rules and regulationid.

2. PRECAUTIONS

In addition to the precautions indicated in the "Installation, Operation and Maintenance General Manual" special attention should

be paid to the following warning notes:

-The fan must be installed at a height of not less than 2.7m from the floor below. Installation at a lower height is

considered "improper use". In case of "improper use" the manufacturer declines all responsibility for any damage

that may be caused to persons or property, and any warranty will be considered invalid.

RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI GRADE 8.

Dimensions

9,5

Table 1 Use the values shown in the table to tighten all the screws.

- Check/inspect and eventually retighten all the fixing annually.

- Fans should not operate in case of strong wind (≥ 6m/s).

The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation

is correct, in compliance with any national and local regulations.

3. TYPE

Ceiling fans with EC brushless motor designed for industrial, civil and zootechnical applications, where high performance are

required.

M10

M12

M14

M16

127

198