aerauliqa AD1400A Manual - Page 10
Browse online or download pdf Manual for Fan aerauliqa AD1400A. aerauliqa AD1400A 20 pages. High volume circulation fans
EN
AD1400A
High volume circulation fans
INDEX
GENERAL INFORMATION
1.
2. PRECUTIONS
3. TYPE
4. MAIN FEATURES
5. DATA
6. DIMENSIONS AND CLEARANCES
7. COMPONENTS
8. INSTALLATION
9. WIRING DIAGRAM
9.1 CTRL-A (accessory on request)
9.2 CONTROL WITH EXTERNAL POTENTIOMETER (not supplied)
9.3 CTRL-XWS (accessory on request)
9.4 CTRL-XTHI (accessory on request)
10. CLEANING
11. TROUBLESHOOTING
11.1 Connection parameters
11.2 Modbus registers - Input registers
11.3 Alarm codes / led status / troubleshooting
12. DECLARATION OF CONFORMITY AND INCORPORATION
1. GENERAL INFORMATION
Carefully read the instructions contained in this manual.
This Specific Manual MUST be read in conjunction with the "Installation, Operation and Maintance General Manual".
Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and
accessories without any obligation to update previous productions and manuals.
The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in
accordance with local rules and regulationid.
2. PRECAUTIONS
In addition to the precautions indicated in the "Installation, Operation and Maintenance General Manual" special attention should
be paid to the following warning notes:
-The fan must be installed at a height of not less than 2.7m from the floor below. Installation at a lower height is
considered "improper use". In case of "improper use" the manufacturer declines all responsibility for any damage
that may be caused to persons or property, and any warranty will be considered invalid.
RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI GRADE 8.
Dimensions
M6
Nm
9,5
Table 1 Use the values shown in the table to tighten all the screws.
- Check/inspect and eventually retighten all the fixing annually.
- Fans should not operate in case of strong wind (≥ 6m/s).
The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation
is correct, in compliance with any national and local regulations.
3. TYPE
Ceiling fans with EC brushless motor designed for industrial, civil and zootechnical applications, where high performance are
required.
M8
M10
M12
23
46
79
M14
M16
127
198
10
10
10
10
11
11
11
12
12
14
14
14
15
15
15
16
16
16
16
17