Xerox WORKCENTRE 7120 Manual del administrador del sistema - Página 15

Navegue en línea o descargue pdf Manual del administrador del sistema para Impresora Xerox WORKCENTRE 7120. Xerox WORKCENTRE 7120 20 páginas. Color networking mfp a3
También para Xerox WORKCENTRE 7120: Manual del evaluador (25 páginas), Manual del evaluador (24 páginas), Manual de referencia (30 páginas), Especificaciones (14 páginas), Especificaciones (14 páginas), Comparación de la competencia (11 páginas), Comparación de la competencia (11 páginas), Folleto y especificaciones (4 páginas), Manual de referencia (29 páginas), Manual de uso rápido (20 páginas), Manual de uso rápido (20 páginas), Manual de uso rápido (20 páginas), Manual de uso rápido (20 páginas), Manual de instalación (2 páginas), Manual de instalación (2 páginas), Manual de uso rápido (20 páginas), Manual de referencia (32 páginas)

Imprimir página
Xerox WORKCENTRE 7120 Manual del administrador del sistema

Initial Setup at the Control Panel

The Installation Wizard
The first time the printer is turned on, the Installation Wizard starts. The wizard prompts you with a
series of questions to help you configure basic settings for your printer. You are prompted to:
•
Set the current date and time.
•
Select your local time zone.
Configuration Report
After you complete the installation wizard, you can print a Configuration Report. The Configuration
Report lists the printer's current settings. For details, see
page 17.
System Administrator Access at the Control Panel
To configure the printer from the control panel, press the Machine Status button, then touch the Tools
tab. If the printer is locked, log in as the system administrator.
To log in as a system administrator:
At the printer control panel, press the Log In/Out button.
1.
2.
Type admin and touch Next.
Type the administrator passcode and touch Enter. The default password is 1111.
3.
Manually Setting the Printer's Ethernet Interface Speed
The printer's Ethernet interface automatically detects the speed of your network. If your network is
connected to another auto-sensing device, such as a hub, the hub may not detect the correct speed.
Refer to the configuration page to make sure the printer has detected the correct speed of your
network. To view the configuration page, see
To manually set the speed of the printer's Ethernet interface:
1.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
Touch System Settings > Connectivity & Network Setup > Protocol Settings.
2.
3.
Touch Ethernet Rated Speed and touch Change Settings.
4.
Select the Speed to match the speed set on your hub or switch.
5.
Touch Save, then touch Close.
Assigning a Network Address
By default, the printer automatically acquires a network address from a DHCP server. To assign a static
IP address, configure DNS server settings, or configure other TCP/IP settings, see
Accessing the Configuration Report
Accessing the Configuration Report
WorkCentre 7120 Multifunction Printer
on page 17.
TCP/IP
on page 20.
System Administrator Guide
Initial Setup
on
15