Xerox WORKCENTRE 7120 Manual del administrador del sistema - Página 16

Navegue en línea o descargue pdf Manual del administrador del sistema para Impresora Xerox WORKCENTRE 7120. Xerox WORKCENTRE 7120 20 páginas. Color networking mfp a3
También para Xerox WORKCENTRE 7120: Manual del evaluador (25 páginas), Manual del evaluador (24 páginas), Manual de referencia (30 páginas), Especificaciones (14 páginas), Especificaciones (14 páginas), Comparación de la competencia (11 páginas), Comparación de la competencia (11 páginas), Folleto y especificaciones (4 páginas), Manual de referencia (29 páginas), Manual de uso rápido (20 páginas), Manual de uso rápido (20 páginas), Manual de uso rápido (20 páginas), Manual de uso rápido (20 páginas), Manual de instalación (2 páginas), Manual de instalación (2 páginas), Manual de uso rápido (20 páginas), Manual de referencia (32 páginas)

Imprimir página
Xerox WORKCENTRE 7120 Manual del administrador del sistema
Initial Setup
Initial Setup in CentreWare IS
CentreWare IS is an application on the printer's embedded Web server that allows you to configure
and administer the printer from a Web browser on any computer.
Accessing CentreWare IS
Before you begin:
•
TCP/IP and HTTP must be enabled to access CentreWare IS. If you disable either of these services,
you must enable them at the printer before you can access CentreWare IS. For details, see
Accessing CentreWare IS
•
Refer to the Configuration Report to determine your printer's IP address.
To access CentreWare IS:
At your computer, open a Web browser, type the printer's IP address in the address field, then press
Enter or Return.
Note:
If your printer is locked, type the system administrator user name and password to access
the Properties tab. The administrator user name is admin and the default password is 1111.
Locking or Unlocking the Printer
To lock or unlock the printer:
At the printer control panel, press Machine Status and touch the Tools tab
1.
2.
Touch Authentication / Security Settings > System Administrator Settings > System
Administrators Login ID.
Touch On to lock the printer or Off to unlock, then touch Save.
3.
Changing the System Administrator Password
Xerox recommends that you change the default system administrator password after you configure
the printer for security. Be sure to store the password in a secure location.
To change the administrator password:
1.
In CentreWare IS, click Properties > Security > System Administrator Settings.
2.
Next to Administrator's Passcode, type the new password
3.
Retype the password to verify.
4.
Change the Administrator's Login ID or the allowed maximum number of login attempts if
desired.
5.
Click Apply.
16
WorkCentre 7120 Multifunction Printer
System Administrator Guide
on page 16.