Xerox WORKCENTRE 7120 System Administrator Manual - Page 16

Browse online or download pdf System Administrator Manual for Printer Xerox WORKCENTRE 7120. Xerox WORKCENTRE 7120 20 pages. Color networking mfp a3
Also for Xerox WORKCENTRE 7120: Evaluator Manual (25 pages), Evaluator Manual (24 pages), Reference Manual (30 pages), Specifications (14 pages), Specifications (14 pages), Competitive Comparison (11 pages), Competitive Comparison (11 pages), Brochure & Specs (4 pages), Reference Manual (29 pages), Quick Use Manual (20 pages), Quick Use Manual (20 pages), Quick Use Manual (20 pages), Quick Use Manual (20 pages), Installation Manual (2 pages), Installation Manual (2 pages), Quick Use Manual (20 pages), Reference Manual (32 pages)

Print Page
Xerox WORKCENTRE 7120 System Administrator Manual
Initial Setup
Initial Setup in CentreWare IS
CentreWare IS is an application on the printer's embedded Web server that allows you to configure
and administer the printer from a Web browser on any computer.
Accessing CentreWare IS
Before you begin:
•
TCP/IP and HTTP must be enabled to access CentreWare IS. If you disable either of these services,
you must enable them at the printer before you can access CentreWare IS. For details, see
Accessing CentreWare IS
•
Refer to the Configuration Report to determine your printer's IP address.
To access CentreWare IS:
At your computer, open a Web browser, type the printer's IP address in the address field, then press
Enter or Return.
Note:
If your printer is locked, type the system administrator user name and password to access
the Properties tab. The administrator user name is admin and the default password is 1111.
Locking or Unlocking the Printer
To lock or unlock the printer:
At the printer control panel, press Machine Status and touch the Tools tab
1.
2.
Touch Authentication / Security Settings > System Administrator Settings > System
Administrators Login ID.
Touch On to lock the printer or Off to unlock, then touch Save.
3.
Changing the System Administrator Password
Xerox recommends that you change the default system administrator password after you configure
the printer for security. Be sure to store the password in a secure location.
To change the administrator password:
1.
In CentreWare IS, click Properties > Security > System Administrator Settings.
2.
Next to Administrator's Passcode, type the new password
3.
Retype the password to verify.
4.
Change the Administrator's Login ID or the allowed maximum number of login attempts if
desired.
5.
Click Apply.
16
WorkCentre 7120 Multifunction Printer
System Administrator Guide
on page 16.