Xerox WORKCENTRE 7120 Sistem Yöneticisi Kılavuzu - Sayfa 16

Yazıcı Xerox WORKCENTRE 7120 için çevrimiçi göz atın veya pdf Sistem Yöneticisi Kılavuzu indirin. Xerox WORKCENTRE 7120 20 sayfaları. Color networking mfp a3
Ayrıca Xerox WORKCENTRE 7120 için: Değerlendirici El Kitabı (25 sayfalar), Değerlendirici El Kitabı (24 sayfalar), Referans Kılavuzu (30 sayfalar), Teknik Özellikler (14 sayfalar), Teknik Özellikler (14 sayfalar), Rekabetçi Karşılaştırma (11 sayfalar), Rekabetçi Karşılaştırma (11 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Referans Kılavuzu (29 sayfalar), Hızlı Kullanım Kılavuzu (20 sayfalar), Hızlı Kullanım Kılavuzu (20 sayfalar), Hızlı Kullanım Kılavuzu (20 sayfalar), Hızlı Kullanım Kılavuzu (20 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Kılavuzu (2 sayfalar), Hızlı Kullanım Kılavuzu (20 sayfalar), Referans Kılavuzu (32 sayfalar)

Initial Setup

Initial Setup in CentreWare IS

CentreWare IS is an application on the printer's embedded Web server that allows you to configure

and administer the printer from a Web browser on any computer.

Accessing CentreWare IS

Before you begin:

•

TCP/IP and HTTP must be enabled to access CentreWare IS. If you disable either of these services,

you must enable them at the printer before you can access CentreWare IS. For details, see

Accessing CentreWare IS

•

Refer to the Configuration Report to determine your printer's IP address.

To access CentreWare IS:

At your computer, open a Web browser, type the printer's IP address in the address field, then press

Enter or Return.

Note:

If your printer is locked, type the system administrator user name and password to access

the Properties tab. The administrator user name is admin and the default password is 1111.

Locking or Unlocking the Printer

To lock or unlock the printer:

At the printer control panel, press Machine Status and touch the Tools tab

Touch Authentication / Security Settings > System Administrator Settings > System

Administrators Login ID.

Touch On to lock the printer or Off to unlock, then touch Save.

Changing the System Administrator Password

Xerox recommends that you change the default system administrator password after you configure

the printer for security. Be sure to store the password in a secure location.

To change the administrator password:

In CentreWare IS, click Properties > Security > System Administrator Settings.

Next to Administrator's Passcode, type the new password

Retype the password to verify.

Change the Administrator's Login ID or the allowed maximum number of login attempts if

desired.

Click Apply.

WorkCentre 7120 Multifunction Printer

System Administrator Guide

on page 16.