Xerox Phaser 860 Manual de configuración de redes - Página 25

Navegue en línea o descargue pdf Manual de configuración de redes para Accesorios para impresoras Xerox Phaser 860. Xerox Phaser 860 42 páginas. Color printer
También para Xerox Phaser 860: Manual de instalación del módulo de bandeja (2 páginas), Manual de instalación (2 páginas), Manual de instalación (1 páginas), Manual de liberación rápida (1 páginas), Manual complementario (1 páginas), Manual complementario (11 páginas), Folleto y especificaciones (4 páginas), Mapa del menú (1 páginas), Manual de configuración y referencia rápida (36 páginas), Manual de instalación (1 páginas), Manual de servicio (11 páginas)

If the printer is not in the Chooser, check that the Configuration Page shows a printer

name, a node number, and a zone.

If there is no node number, verify that the printer is properly cabled to the network.

Test the cable segment by plugging in a new cable segment or using the cable segment

of a printer that is in the Chooser.

If your network uses zones, and there is no zone name on the Configuration Page, or if

the Configuration Page shows the wrong zone, see page 21.

Note

If the printer cannot create a zone, it must already exist.

If the Configuration Page shows the correct printer name, node number, and zone, and the

printer is still not visible in the Chooser, check the following items:

If there is a Novell NetWare server on the network, verify that the NetWare server has

been configured for AppleTalk Phase 2 routing and addressing.

If there is a Windows NT server on the network, verify that the printer has not been

captured by a Windows NT machine.

If the printer continually reboots when connected to the network, it is possible that a

router is broadcasting a zone of *, which is an invalid zone.

If using QuickDraw GX, the GX drivers must be installed. If you don't use QuickDraw

GX, disable the QuickDraw GX, QuickDraw Helper, and ColorSync extensions.

Networking Setup Guide

EtherTalk Configuration