Xerox 6100BD - Phaser Color Laser Printer Manual de instalación - Página 28

Navegue en línea o descargue pdf Manual de instalación para Software Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 34 páginas. Disk overwrite installation and usage
También para Xerox 6100BD - Phaser Color Laser Printer: Especificaciones (2 páginas), Manual del usuario (32 páginas), Folleto y especificaciones (4 páginas), Manual del usuario (28 páginas), Manual de instalación (2 páginas), Manual de seguridad (38 páginas), Manual de instalación (2 páginas), Nota de publicación (2 páginas), Manual de introducción (37 páginas), Manual (34 páginas), Manual (34 páginas), Manual de introducción (34 páginas), Manual del usuario (32 páginas), Manual (11 páginas), Manual de instalación y funcionamiento (8 páginas)

Imprimir página

Xerox 6100BD - Phaser Color Laser Printer Manual de instalación

FREEFLOW PRINT SERVER 6.0.xx

W-7 data element definitions

This section defines the data elements determined by the

network administrator or the Xerox Systems Analyst during the

setup of the NetWare Gateway on each Novell Server who will

be transferring documents from Novell clients to the print server.

To support a smoother, faster install process, make sure these

data elements are known and entered in this worksheet before

the scheduled day of installation.

Novell Internet Net Number: This is the internal network

number, assigned to the print server that identifies the

FreeFlow Print Server on the Novell network. This data element

must be a new, eight-digit hexadecimal number that is a unique

number on the Novell network, and is available from the network

administrator.

NOTE: If necessary, pad the number with zeros from the left to

achieve the eight digits.

Novell Net Number: This is an eight-digit, hexadecimal,

network number that identifies the Novell network. The external

network number can be any number defined that falls within the

range of 1 to FFFFFFFFE.

NOTE: This number must be the same on both the Novell server

and the print server.

You can find the Novell network number by entering the

CONFIG command at the Novell File Server system console

prompt, as in the following Frame type ETHERNET_802.3

example. The network number is in bold on the last line of this

example, as the LAN protocol IPX network number. This

number may also be referred to as the Ethernet Net Number.

File server name: Cust 2

IPX internal network number: 0123A.B09

Novell NE2000

Version 3.25 June 17, 1993

Hardware setting: I/O Port 300h to 31Fh,

Interrupt 3h

Node address 00009B99E999

Frame type: ETHERNET 802.3

Boardname: PUBLIC

LAN protocol: IPX network 0000BB09

At this point, make a note of the name of the file server since it

will be needed later. This information will appear after the entry

File server name. The comparable ETHERNET_Il entry would

look like the following example where the name of the file server

is Cust_2 and the network number is in bold on the last line as

the LAN protocol IPX network number. Remember, this is an

example, and your setup will most likely be different.

File server name: Cust 2

IPX internal network number: 0123AB09

Novell NE2000

GETTING READY FOR THE PRINT SERVER INSTALLATION

XEROX FREEFLOW PRINT SERVER