Xerox 6100BD - Phaser Color Laser Printer Installation Manual - Page 28

Browse online or download pdf Installation Manual for Software Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 34 pages. Disk overwrite installation and usage
Also for Xerox 6100BD - Phaser Color Laser Printer: Specifications (2 pages), User Manual (32 pages), Brochure & Specs (4 pages), User Manual (28 pages), Install Manual (2 pages), Security Manual (38 pages), Install Manual (2 pages), Release Note (2 pages), Getting Started Manual (37 pages), Manual (34 pages), Manual (34 pages), Getting Started Manual (34 pages), User Manual (32 pages), Manual (11 pages), Installation And Operation Manual (8 pages)

Print Page
Xerox 6100BD - Phaser Color Laser Printer Installation Manual
FREEFLOW PRINT SERVER 6.0.xx
22
W-7 data element definitions
This section defines the data elements determined by the
network administrator or the Xerox Systems Analyst during the
setup of the NetWare Gateway on each Novell Server who will
be transferring documents from Novell clients to the print server.
To support a smoother, faster install process, make sure these
data elements are known and entered in this worksheet before
the scheduled day of installation.
Novell Internet Net Number: This is the internal network
number, assigned to the print server that identifies the
FreeFlow Print Server on the Novell network. This data element
must be a new, eight-digit hexadecimal number that is a unique
number on the Novell network, and is available from the network
administrator.
NOTE: If necessary, pad the number with zeros from the left to
achieve the eight digits.
Novell Net Number: This is an eight-digit, hexadecimal,
network number that identifies the Novell network. The external
network number can be any number defined that falls within the
range of 1 to FFFFFFFFE.
NOTE: This number must be the same on both the Novell server
and the print server.
You can find the Novell network number by entering the
CONFIG command at the Novell File Server system console
prompt, as in the following Frame type ETHERNET_802.3
example. The network number is in bold on the last line of this
example, as the LAN protocol IPX network number. This
number may also be referred to as the Ethernet Net Number.
File server name: Cust 2
IPX internal network number: 0123A.B09
Novell NE2000
Version 3.25 June 17, 1993
Hardware setting: I/O Port 300h to 31Fh,
Interrupt 3h
Node address 00009B99E999
Frame type: ETHERNET 802.3
Boardname: PUBLIC
LAN protocol: IPX network 0000BB09
At this point, make a note of the name of the file server since it
will be needed later. This information will appear after the entry
File server name. The comparable ETHERNET_Il entry would
look like the following example where the name of the file server
is Cust_2 and the network number is in bold on the last line as
the LAN protocol IPX network number. Remember, this is an
example, and your setup will most likely be different.
File server name: Cust 2
IPX internal network number: 0123AB09
Novell NE2000
GETTING READY FOR THE PRINT SERVER INSTALLATION
XEROX FREEFLOW PRINT SERVER