Xerox 7700 Manual de instalación - Página 17

Navegue en línea o descargue pdf Manual de instalación para Software Xerox 7700. Xerox 7700 42 páginas. Color laser printer
También para Xerox 7700: Manual del usuario (35 páginas), Manual complementario (1 páginas), Manual de configuración y referencia rápida (40 páginas), Manual de instalación (33 páginas), Manual de servicio (29 páginas), Manual de servicio (17 páginas), Manual de instalación (2 páginas)

Xerox 7700 Manual de instalación
TCP/IP Configuration

PhaserPort for MacOS System Requirements

Macintosh PowerPC.
Apple's LaserWriter version 8.6 or later, with Desktop Printing enabled.
OpenTransport version 1.1 or later networking. TCP/IP networking provided by
MacTCP software is not supported. The Macintosh must be properly configured to
communicate with the printer (see page 11).
Files and Installation
PhaserPort for MacOS consists of two files:
PhaserPortLib, a special type of shared library recognized by the LaserWriter driver
version 8.6.
PhaserPort Printer Tool, a Macintosh PowerPC application for creating desktop
printers that communicate with PhaserPortLib.
To install PhaserPort for MacOS:
1.
Copy PhaserPortLib into the folder System Folder: Extensions: Printing Plug-Ins.
2.
Copy the PhaserPort Printer Tool to any folder on the Macintosh.
Creating a Desktop Printer With PhaserPort for MacOS
1.
Launch the PhaserPort Printer Tool.
2.
In the Printer Internet Address field, type the printer's IP address or DNS name.
3.
In the Desktop Printer Name field, type a name for the desktop printer.
4.
Click Verify to contact the printer over the TCP/IP network and verify its network
configuration.
5.
Click Create to create the desktop printer.
6.
In the Finder, use the Printing Menu's Setup command to finalize the configuration of
the new desktop printer.
Note
Certain utilities, such as Adobe Font Downloader, are not compatible with
PhaserPort for MacOS software, because they attempt to directly communicate
with the printer using the AppleTalk protocol. If you must use this software,
create an AppleTalk desktop printer, and then delete this printer after running
and quitting the non-compatible software.
12
Phaser 7700 Color Printer