Xerox 7700 설치 매뉴얼 - 페이지 17

{카테고리_이름} Xerox 7700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 7700 42 페이지. Color laser printer
Xerox 7700에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 보충 설명서 (1 페이지), 설정 및 빠른 참조 매뉴얼 (40 페이지), 설치 매뉴얼 (33 페이지), 서비스 매뉴얼 (29 페이지), 서비스 매뉴얼 (17 페이지), 설정 매뉴얼 (2 페이지)

TCP/IP Configuration

PhaserPort for MacOS System Requirements

Macintosh PowerPC.

Apple's LaserWriter version 8.6 or later, with Desktop Printing enabled.

OpenTransport version 1.1 or later networking. TCP/IP networking provided by

MacTCP software is not supported. The Macintosh must be properly configured to

communicate with the printer (see page 11).

Files and Installation

PhaserPort for MacOS consists of two files:

PhaserPortLib, a special type of shared library recognized by the LaserWriter driver

version 8.6.

PhaserPort Printer Tool, a Macintosh PowerPC application for creating desktop

printers that communicate with PhaserPortLib.

To install PhaserPort for MacOS:

Copy PhaserPortLib into the folder System Folder: Extensions: Printing Plug-Ins.

Copy the PhaserPort Printer Tool to any folder on the Macintosh.

Creating a Desktop Printer With PhaserPort for MacOS

Launch the PhaserPort Printer Tool.

In the Printer Internet Address field, type the printer's IP address or DNS name.

In the Desktop Printer Name field, type a name for the desktop printer.

Click Verify to contact the printer over the TCP/IP network and verify its network

configuration.

Click Create to create the desktop printer.

In the Finder, use the Printing Menu's Setup command to finalize the configuration of

the new desktop printer.

Note

Certain utilities, such as Adobe Font Downloader, are not compatible with

PhaserPort for MacOS software, because they attempt to directly communicate

with the printer using the AppleTalk protocol. If you must use this software,

create an AppleTalk desktop printer, and then delete this printer after running

and quitting the non-compatible software.

Phaser 7700 Color Printer