Yamaha Arius YDP-144 Manual del usuario - Página 37
Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha Arius YDP-144. Yamaha Arius YDP-144 48 páginas. Midi reference
También para Yamaha Arius YDP-144: Manual del usuario (15 páginas)
Imprimir página
YDP-S54 Assembly
Remove all parts from the package and make sure you
have all of the items.
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them. Position the pads so that
they will not hide the connector panel on the bottom of A.
Foamed styrol pads
Connector panel
Cord holder
Bundled pedal cord inside
6 x 25 mm long screws x 4
6 x 20 mm long screws x 2
6 x 16 mm short screws x 4
4 x 12 mm thin screws x 4
4 x 20 mm tapping screws x 2
* The two anti-fall brackets are identical. (Either one can be used
for left or right.)
* The adaptor may not be included, or may look different from the
illustration above, depending on your particular area. Please
check with your Yamaha dealer.
1.
Attach (finger-tighten) C to D and E.
1-1
Untie and straighten out the bundled pedal
cord.
Don't discard the vinyl tie. You will need it later in
step 7.
AC adaptor x 1
Power cord x 1
Caps x 2
Anti-fall brackets x 2
1-2
Align D and E with each end of C.
1-3
Attach D and E to C by finger-tightening
the long screws (6 x 20 mm).
1-3
2.
Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may
be different from the other side. In this case,
position B so that the side of the surface color
similar to D and E faces the player.
2-1
Attach the top of B to D and E by finger-
tightening the two thin screws (4 x 12 mm).
2-2
While pressing on the lower part of D and E
from the outside, attach the anti-fall
brackets and then secure the bottom ends
of B using four long screws (6 x 25 mm).
2-3
Insert the other two tapping screws (4 x 20
mm) into the other two screw holes to
secure B.
2-4
Securely tighten the screws on the top of B
that were attached in Step 2-1.
2-1, 2-4
2-2
2-3
Secure the anti-fall brackets using the screws.
CAUTION
Be sure to attach the anti-fall brackets to the instrument, to
ensure stability. Failure to do so might result in damage to the
instrument or even injury.
YDP-164, YDP-144, YDP-S54 Owner's Manual
Keyboard Stand Assembly
1-2
2-2
37