Yamaha Arius YDP-144 Panduan Pemilik - Halaman 37

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alat Musik Yamaha Arius YDP-144. Yamaha Arius YDP-144 48 halaman. Midi reference
Juga untuk Yamaha Arius YDP-144: Panduan Pengguna (15 halaman)

Halaman Cetak

YDP-S54 Assembly

Remove all parts from the package and make sure you

have all of the items.

Remove foamed styrol pads from the package, position them on

the floor, then place A on top of them. Position the pads so that

they will not hide the connector panel on the bottom of A.

Foamed styrol pads

Connector panel

Cord holder

Bundled pedal cord inside

6 x 25 mm long screws x 4

6 x 20 mm long screws x 2

6 x 16 mm short screws x 4

4 x 12 mm thin screws x 4

4 x 20 mm tapping screws x 2

* The two anti-fall brackets are identical. (Either one can be used

for left or right.)

* The adaptor may not be included, or may look different from the

illustration above, depending on your particular area. Please

check with your Yamaha dealer.

Attach (finger-tighten) C to D and E.

1-1

Untie and straighten out the bundled pedal

cord.

Don't discard the vinyl tie. You will need it later in

step 7.

AC adaptor x 1

Power cord x 1

Caps x 2

Anti-fall brackets x 2

1-2

Align D and E with each end of C.

1-3

Attach D and E to C by finger-tightening

the long screws (6 x 20 mm).

1-3

Attach B.

Depending on the model of digital piano you

purchased, the surface color of one side of B may

be different from the other side. In this case,

position B so that the side of the surface color

similar to D and E faces the player.

2-1

Attach the top of B to D and E by finger-

tightening the two thin screws (4 x 12 mm).

2-2

While pressing on the lower part of D and E

from the outside, attach the anti-fall

brackets and then secure the bottom ends

of B using four long screws (6 x 25 mm).

2-3

Insert the other two tapping screws (4 x 20

mm) into the other two screw holes to

secure B.

2-4

Securely tighten the screws on the top of B

that were attached in Step 2-1.

2-1, 2-4

2-2

2-3

Secure the anti-fall brackets using the screws.

CAUTION

Be sure to attach the anti-fall brackets to the instrument, to

ensure stability. Failure to do so might result in damage to the

instrument or even injury.

YDP-164, YDP-144, YDP-S54 Owner's Manual

Keyboard Stand Assembly

1-2

2-2