Yamaha DM 2000 Version 2 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 37 páginas. Version 2
También para Yamaha DM 2000 Version 2: Manual del usuario (44 páginas), Manual de instalación (28 páginas), Manual de instalación (14 páginas), Manual de instalación (22 páginas), Manual de instalación del software (13 páginas), Manual del usuario (1 páginas), Manual complementario (4 páginas), Manual de instalación (35 páginas), Manual de orientación (8 páginas), Manual de redundancia (8 páginas), Manual del usuario (3 páginas), (alemán) Manual de instalación del sistema operativo (13 páginas)

Imprimir página

Yamaha DM 2000 Version 2 Manual del usuario

1. Matrix Sends

Chapter 2—Console Window

Input Channels

V U

Studio Manager for DM2000 V1.1—Owner's Manual

SOURCE parameter

This parameter is used to select an Input source. To select an

Input source, click the parameter and choose from the list that

appears.

Routing buttons

These buttons are used to route the Input Channel to the Bus

Outs.

STEREO button

This button is used to route the Input Channel's signal to the

Stereo Out.

DIRECT button

This button turns on and off the Input Channel's routing to its

Direct Out.

Direct Out parameter

This parameter is used to select the Direct Out destination. To

select a destination, click the parameter and choose from the list

that appears.

PHASE button

This button is used to reverse the signal phase of the channel.

INSERT button

This button is used to turn on and off the Input Channel's

Insert.

GATE button

This button is used to turn on and off the Input Channel's Gate.

Gate open/close indicators

These indicators display whether the Gate is open (green) or

closed (red).

Gate threshold

This displays the Gate Threshold, which can be set by dragging.

COMP button

This button is used to turn on and off the Input Channel's Com-

pressor.

Compressor curve

This display shows the Compressor's curve.

EQ button

This button is used to turn on and off the Input Channel's EQ.

EQ curve

This display shows the Equalizer's curve, which can be set by

dragging.

DELAY button

This button is used to turn on and off the Input Channel's Delay

function.