Yamaha DM 2000 Version 2 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 37 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel du propriétaire (44 pages), Manuel d'installation (28 pages), Manuel d'installation (14 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel de configuration (35 pages), Manuel d'orientation (8 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Imprimer la page

Yamaha DM 2000 Version 2 Manuel du propriétaire

1. Matrix Sends

Chapter 2—Console Window

Input Channels

V U

Studio Manager for DM2000 V1.1—Owner's Manual

SOURCE parameter

This parameter is used to select an Input source. To select an

Input source, click the parameter and choose from the list that

appears.

Routing buttons

These buttons are used to route the Input Channel to the Bus

Outs.

STEREO button

This button is used to route the Input Channel's signal to the

Stereo Out.

DIRECT button

This button turns on and off the Input Channel's routing to its

Direct Out.

Direct Out parameter

This parameter is used to select the Direct Out destination. To

select a destination, click the parameter and choose from the list

that appears.

PHASE button

This button is used to reverse the signal phase of the channel.

INSERT button

This button is used to turn on and off the Input Channel's

Insert.

GATE button

This button is used to turn on and off the Input Channel's Gate.

Gate open/close indicators

These indicators display whether the Gate is open (green) or

closed (red).

Gate threshold

This displays the Gate Threshold, which can be set by dragging.

COMP button

This button is used to turn on and off the Input Channel's Com-

pressor.

Compressor curve

This display shows the Compressor's curve.

EQ button

This button is used to turn on and off the Input Channel's EQ.

EQ curve

This display shows the Equalizer's curve, which can be set by

dragging.

DELAY button

This button is used to turn on and off the Input Channel's Delay

function.