Yamaha PSS-A50 Referencia - Página 3

Navegue en línea o descargue pdf Referencia para Instrumentos musicales Yamaha PSS-A50. Yamaha PSS-A50 4 páginas. Midi reference
También para Yamaha PSS-A50: Manual del usuario (24 páginas)

Imprimir página

MIDI Data Format

1 By default (factory settings) the instrument ordinarily func-

tions as a 16-channel multi-timbral tone generator, and incom-

ing data does not affect the panel voices or panel settings.

However, the MIDI Master Tuning affects the panel voices and

recorded data.

2 Exclusive

F0H, 7EH, 7FH, 09H, 01H, F7H

• This message automatically restores all default settings for

the instrument, with the exception of MIDI Master Tuning.

NOTE

This instrument does not support the GM format.

F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H

• This message allows the volume of all channels to be

changed simultaneously (Universal System Exclusive).

• The values of "mm" is used for MIDI Master Volume. (Val-

ues for "ll" are ignored.)

Precautions when Using the 5V DC / USB TO

HOST Terminal

When connecting the computer to the 5V DC / USB TO HOST terminal (page 6 in the Owner's Manual), make sure to observe the fol-

lowing points to avoid freezing the computer and corrupting or losing the data.

• Use an A-micro B type USB cable of less than 3 meters. USB 3.0 cables cannot be used.

• Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from the 5V DC /

USB TO HOST terminal.

• Quit any open application software on the computer.

• Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard or

playing back a song.)

• While the computer is connected to the instrument, you should wait for six seconds or more between these operations: (1) when turn-

ing the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable.

If the computer or the instrument freezes, restart the application software or the computer OS, or turn the power to the instrument off

then on again.

F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H

• This message simultaneously changes the tuning value of all

channels.

• The values of "mm" and "ll" are used for MIDI Master Tun-

ing.

• The default value of "mm" and "ll" are 08H and 00H,

respectively. Any values can be used for "n" and "cc".

3 When the recording or playback of the recorded phrase is

started, an FAH message is transmitted.

When recording or playback of the recorded phrase is stopped,

an FCH message is transmitted.

4 Local ON/OFF

<Local ON> Bn, 7A, 7F

<Local OFF> Bn, 7A, 00

• Value for "n" is ignored.

PSS-A50 MIDI Reference