Yamaha YDP-101E Manual del usuario - Página 35
Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YDP-101E. Yamaha YDP-101E 48 páginas. Yamaha digital piano owner's manual
Imprimir página
MIDI Data Format/MIDI-Datenformat/
Format des données MIDI/Formato de datos MIDI
If you're already very familiar with MIDI, or are using a
computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control the YDP-101.
Falls Sie bereits mit MIDI vertraut sind oder einen Compu-
ter zur Erzeugung von MIDI-Steuermeldungen für die
Instrumente verwenden, können Sie sich zur Steuerung des
YDP-101 nach den im folgenden Abschnitt aufgeführten
Spezifikationen richten.
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)*
vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv]
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity
* If received value exceeds the supported range for the selected
voice, the note is adjusted by the necessary number of octaves.
2. CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number
vv = Data Range
(1) Bank Select
ccH
Parameter
00H
Bank Select MSB 00H:Normal
20H
Bank Select LSB
Bank selection processing does not occur until receipt of next
Program Change message.
(2) Main Volume (reception only)
ccH
Parameter
07H
Volume MSB
(3) Expression
ccH
Parameter
0BH
Expression MSB
(4) Damper
ccH
Parameter
40H
Damper MSB
(5) Sostenuto
ccH
Parameter
42H
Sostenuto
(6) Soft Pedal
ccH
Parameter
43H
Soft Pedal
(7) Effect1 Depth ( Reverb Send Level )
ccH
Parameter
5BH
Effect1 Depth
Adjusts the reverb send level.
(reception only)
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H...7FH
Data Range (vvH)
00H-3FH:off, 40H-7FH:on
Data Range (vvH)
00H-3FH:off, 40H-7FH:on
Data Range (vvH)
00H...7FH
Si vous êtes très familier avec l'interface MIDI ou si vous
utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par
ordinateur, les données suivantes vous seront utiles et vous
aideront à commander le YDP-101.
SI usted está ya familiarizado con MIDI, o si emplea una
computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos
proporcionados en esta sección le ayudarán a controlar la
YDP-101.
3 MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range
(1) All Sound Off
ccH
Parameter
78H
All Sound Off
Switches off all sound from the channel. Does not reset Note On
and Hold On conditions established by Channel Messages.
(2) Reset All Controllers
ccH
Parameter
79H
Reset All Controllers 00H
Resets controllers as follows.
Controller
Value
Expression
127 (max)
Damper Pedal
0 (off)
Sostenuto
0 (off)
Soft Pedal
0 (off)
(3) Local Control (reception only)
ccH
Parameter
7AH
Local Control
(4) All Notes Off
ccH
Parameter
7BH
All Notes Off
Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the damper or sostenuto pedal
will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH
Parameter
7CH
Omni Off
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH
Parameter
7DH
Omni On
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH
Parameter
7EH
Mono
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH
Parameter
7FH
Poly
Same processing as for All Sound Off.
• When control change is turned OFF in the Function mode,
control change data will not be transmitted or received except
for Bank Select and Mode messages.
• Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with "All Note Off" transmission).
• When a voice bank MSB/LSB is received, the number is stored
in the internal buffer regardless of the received order, then the
stored value is used to select the appropriate voice when a
program change message is received.
• The Multi-timbre and Poly modes are always active. No change
occurs when OMNI ON, OMNI OFF, MONO, or POLY mode
messages are received.
Data Range (vvH)
00H
Data Range (vvH)
Data Range (vvH)
00H (off), 7FH (on)
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H
Data Range (vvH)
00H
YDP-101
35