Yamaha YDP-101E Manual del usuario - Página 36
Navegue en línea o descargue pdf Manual del usuario para Instrumentos musicales Yamaha YDP-101E. Yamaha YDP-101E 48 páginas. Yamaha digital piano owner's manual
Imprimir página
MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI
4. PROGRAM CHANGE
Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
Normal Voice
MSB
LSB
GRAND PIANO
0
112
E.PIANO
0
112
HARPSICHORD
0
112
STRINGS
0
112
PIPE ORGAN
0
112
• When program change is turned OFF in the Function mode, no
program change data is transmitted or received.
Also, Bank MSB/LSB is not transmitted or received.
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Data
Transmission
F8H
Transmitted every
96 clocks
FAH
Recorder start
FCH
Recorder stop
FEH
Transmitted every
200 milliseconds
• Caution: If an error occurs during MIDI reception, the Damper, Sostenuto,
and Soft effects for all channels are turned off and an All Note Off occurs.
6. SYSTEM EXCLUSIVE MESSAGES
(Yamaha MIDI Format)
Panel Data Transmit
Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... ->
[F7H]
F0H, 43H, 0nH, 7CH
00H, 2CH
43H, 4CH, 20H, 20H
43H, 4CH, 50H, 27H, 39H, 38H (Model ID)
30H, 30H
[PANEL DATA]
[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)
F7H
36
YDP-101
P.C.#=Program Change number
VARIATION Voice
P.C.#
MSB
LSB
P.C.#
0
0
113
0
5
0
112
88
6
0
115
6
48
0
113
49
19
0
113
19
Reception
Received as 96-clock tempo timing
when MIDI clock is set to External
Recorder start
Not received when the MIDI clock
is set to Internal.
Recorder stop
Not received when the MIDI clock
is set to Internal.
If a signal is not received via MIDI
for more than 400 milliseconds, the
same processing will take place for
All Sound Off, All Notes Off and
Reset All Controllers as when those
signals are received.
(n: channel number)
(data length)
(CL)
(version x, y)
(end of exclusive)
• Panel Data Contents
(1) 1'st Voice
(2) Dual On/Off
(3) Dual Voice
(4) Dual Balance
(5) Dual Detune
(6) Dual Voice1 Octave
(7) Dual Voice2 Octave
(8) —
(9) —
(10) —
(11) —
(12) —
(13) —
(14) —
(15) —
(16) —
(17) —
(18) —
(19) Reverb Type 1
(20) Reverb Type 2
(21) Reverb Depth1
(22) Reverb Depth2
(23) —
(24) —
(25) —
(26) Variation 1 On/Off
(27) Variation 2 On/Off
(28) Touch Sensitivity
(29) Fixed Data
(30) Left Pedal Function
(31) Absolute tempo low byte
(32) Absolute tempo high byte
• "
" indicates no affect.
—
• Panel data send requests cannot be received.
7. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1)
Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[ll H] -> [mmH] -> [F7H]
MIDI Master Volume
• Simultaneously changes the volume of all channels.
• When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master volume.
F0H
= Exclusive status
7FH
= Universal Realtime
7FH
= ID of target device
04H
= Sub-ID #1=Device Control Message
01H
= Sub-ID #2=Master Volume
ll H
= Volume LSB
mmH
= Volume MSB
F7H
= End of Exclusive
or
F0H
= Exclusive status
7FH
= Universal Realtime
XnH
= When n is received n=0~F, whichever is received.
X = don't care
04H
= Sub-ID #1=Device Control Message
01H
= Sub-ID #2=Master Volume
ll H
= Volume LSB
mmH
= Volume MSB
F7H
= End of Exclusive