Yamaha htr-5890 Manual de servicio - Página 18
Navegue en línea o descargue pdf Manual de servicio para Receptor Yamaha htr-5890. Yamaha htr-5890 41 páginas.
Imprimir página
- 1. Table of Contents
- 2. Service Manual
- 3. Important Notice
- 4. To Service Personnel
- 5. Front Panel
- 6. Remote Control Panel
- 7. Rear Panels
- 8. Specifications
- 9. Internal View
- 10. Disassembly Procedures
- 11. Updating Firmware
- 12. Self Diagnosis Function (Diag)
- 13. Amp Adjustment
- 14. Display Data
- 15. IC Data
- 16. Remote Control
HTR-5890
• Functions in DIAG mode
In addition to the DIAG menu items, functions as listed
below are available.
• Input selection, Multi channel input
• Center/Surround/Surround Back/Sub-woofer level
adjustment
• Muting
• Speaker relay A/B
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not
available.
* It is possible to confirm Menu No.14 IF STATUS while
keeping the signal process (operation status) of each
DIAG menu by using the input mode key of the main
unit.
• Details of DIAG menu
With full-bit output specified in some modes, it is possible
to execute 0dBFS output without head margin in each
channel.
1. DA601-YSS930
This function is for YSS930 only. Main DSP of YSS930
is selected for FRONT output.
Using the sub-menu, it is possible to select 0dB output
level or full-bit output.
YSS 0dB
• The signal is output including the head margin.
Reference data
INPUT: DVD ANALOG
SUBWOOFER: 50Hz, Others: 1kHz
Input level
Volume
Both ch, -20 dBm
+6.5 dB
18
• Initial settings used to start DIAG
The following initial settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to
those before starting DIAG.
• Master volume: -20dB
• Input: DVD (MULTI CHANNEL INPUT OFF)
• Effect level: 0dB
• Audio mute: OFF
• Speaker relay A/B: ON
• Speaker setting: LARGE / BASS OUT = BOTH
• DIAG menu: DA601-YSS930 (1. YSS 0dB)
SPEAKER OUTPUT
FRONT L/R
CENTER
SURROUND L/R SURROUND BACK
+13.5 dBm
+13.5 dBm
+13.5 dBm
SUBWOOFER
OUTPUT
+13.5 dBm
-7.0 dBm