Yamaha htr-5890 서비스 매뉴얼 - 페이지 18

{카테고리_이름} Yamaha htr-5890에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha htr-5890 41 페이지.

페이지 인쇄

HTR-5890

• Functions in DIAG mode

In addition to the DIAG menu items, functions as listed

below are available.

• Input selection, Multi channel input

• Center/Surround/Surround Back/Sub-woofer level

adjustment

• Muting

• Speaker relay A/B

• Power on/off

• Master volume

* Functions related to the tuner and the set menu are not

available.

* It is possible to confirm Menu No.14 IF STATUS while

keeping the signal process (operation status) of each

DIAG menu by using the input mode key of the main

unit.

• Details of DIAG menu

With full-bit output specified in some modes, it is possible

to execute 0dBFS output without head margin in each

channel.

1. DA601-YSS930

This function is for YSS930 only. Main DSP of YSS930

is selected for FRONT output.

Using the sub-menu, it is possible to select 0dB output

level or full-bit output.

YSS 0dB

• The signal is output including the head margin.

Reference data

INPUT: DVD ANALOG

SUBWOOFER: 50Hz, Others: 1kHz

Input level

Volume

Both ch, -20 dBm

+6.5 dB

• Initial settings used to start DIAG

The following initial settings are used when starting DIAG.

When DIAG is canceled, these settings are restored to

those before starting DIAG.

• Master volume: -20dB

• Input: DVD (MULTI CHANNEL INPUT OFF)

• Effect level: 0dB

• Audio mute: OFF

• Speaker relay A/B: ON

• Speaker setting: LARGE / BASS OUT = BOTH

• DIAG menu: DA601-YSS930 (1. YSS 0dB)

SPEAKER OUTPUT

FRONT L/R

CENTER

SURROUND L/R SURROUND BACK

+13.5 dBm

SUBWOOFER

OUTPUT

+13.5 dBm

-7.0 dBm