Yamaha DSP-E390 Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Yamaha DSP-E390. Yamaha DSP-E390 16 páginas. Natural sound digital sound field processor

Imprimir página

To obtain the best performance of this unit:

If the connecting method of your components is A or C

shown on pages 6–7, set the volume control on the integrated

amplifier or control amplifier to about the halfway position

between the min. and max.

Notes

If you prefer to cancel the DSP, press the EFFECT switch.

The sound will be the normal 2-channel stereo without

surround sound effect.

When CONCERT VIDEO, MONO MOVIE, ROCK

CONCERT or CONCERT HALL is selected, no sound is

heard from the center speaker.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center

speaker even if the output level is already set in "SPEAKER

BALANCE ADJUSTMENT" on page 11.

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear

speakers even if the output level is already set in "SPEAKER

BALANCE ADJUSTMENT" on page 11.

CENTER LEVEL

I 0

REAR LEVEL

I 0

When a monaural sound source is played with DOLBY

PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no

sound is heard from the front speakers and the rear

speakers. Sound is heard only from the center speaker.

However, if the center channel mode is in PHANTOM, the

front speakers output the sound of the center channel.

When this unit's Dolby Pro Logic Surround system is used,

if the main-source sound is considerably altered by

overadjustment of the BASS or TREBLE controls on the

integrated amplifier etc., the relationship between the center

and rear channels may produce an unnatural effect.

If the connected external amplifier has a built-in surround

sound or ambience circuitry, be sure that the surround or

ambience circuitry on that amplifier is off while you are

using this unit's Dolby Pro Logic Surround system.

If the digital sound field program CONCERT VIDEO, MONO

MOVIE, ROCK CONCERT or CONCERT HALL is selected,

this adjustment is useless.

Once the output level is adjusted, the level value will be the

same in the DOLBY PRO LOGIC and DOLBY PRO LOGIC

ENHANCED programs.

If no program is used, this adjustment is useless.

Once the output level is adjusted, the level value will be the

same in all the digital sound field programs.

If no program is used, this adjustment is useless.