Yamaha DSP-E390 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Yamaha DSP-E390. Yamaha DSP-E390 16 páginas. Natural sound digital sound field processor

Imprimir página

SPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The most effective speakers to use with

this unit are front speakers, rear speakers and a center speaker. You may omit the center speaker. (Refer to the "4-Speaker

Configuration" shown below.)

The front speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your

present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center

sounds (dialog etc.) within the Dolby Surround encoded programs. The center speaker needs to be equal in power to the front

speakers, although the rear speakers should not be equal. However, all the speakers should have high enough power handling to

accept the maximum output of this unit.

SPEAKER CONFIGURATION

5-Speaker Configuration

This configuration is the most effective and recommended one.

In this configuration, the center speaker is necessary as well as

the rear speakers. If the digital sound field program DOLBY

PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected,

conversations will be output from the center speaker and the

ambience will be excellent.

Set the center channel mode to the "NORMAL" or "WIDE"

position. (For details, refer to page 10.)

Front L

Surround sound

Rear L

SPEAKER PLACEMENT

The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: front speakers (your normal

stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.

Front R

Center

Front L

TV set

SPEAKER SETUP

Center

Front R

Dialogue

Rear R

Rear L

4-Speaker Configuration

The center speaker is not used in this configuration. If the

digital sound field program DOLBY PRO LOGIC or DOLBY

PRO LOGIC ENHANCED is selected, the center sound is

output from the left and the right front speakers. However, the

sound effect of other programs can be the same as that of the

5-speaker configuration.

Be sure to set the center channel mode to the "PHANTOM"

position. (For details, refer to page 10.)

Front L

Dialogue

Surround sound

Rear L

Front:

In normal position. (The position of your present

stereo speaker system.)

Rear:

Behind your listening position, facing slightly inward.

Nearly six feet (approx. 1.8 m) up from the floor.

Center: Precisely between the front speakers. (To avoid

interference with TV sets, use a magnetically shielded

speaker.)

Front R

Rear R