Directed 403.SUBARU11 Manual de instalación - Página 10

Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles Directed 403.SUBARU11. Directed 403.SUBARU11 19 páginas.

Imprimir página

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
Ensure vehicle is in a safe location and cannot move forward during programming. For
1
vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral
position.
The harnesses must be connected in this exact order:
 
Connect the 14-pin.
1.
2
Connect the 12-pin.
2.
Connect the 10-pin.
3.
When the LED turns on solid red, proceed with the next step.
Press the Push-to-Start (PTS) button one time (1x) to turn the ignition ON. 
3
The LED will turn ON solid orange for 3 seconds.
4
Wait 1 second for the LED to turn ON solid green for 3 seconds, then turn OFF.
5
Press the PTS button one time (1x) to turn the ignition OFF.
You have successfully completed the module programming sequence.
10
403.SUBARU11 1.06 2022 Subaru Outback (Smart Key)
©2023 Directed. All rights reserved.