- ページ 10

自動車アクセサリー Directed 403.SUBARU11のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directed 403.SUBARU11 19 ページ。

Module programming

Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.

Ensure vehicle is in a safe location and cannot move forward during programming. For

vehicles equipped with a manual transmission, make sure the gearshift lever is in the neutral

position.

The harnesses must be connected in this exact order:

Connect the 14-pin.

Connect the 12-pin.

Connect the 10-pin.

When the LED turns on solid red, proceed with the next step.

Press the Push-to-Start (PTS) button one time (1x) to turn the ignition ON.

The LED will turn ON solid orange for 3 seconds.

Wait 1 second for the LED to turn ON solid green for 3 seconds, then turn OFF.

Press the PTS button one time (1x) to turn the ignition OFF.

You have successfully completed the module programming sequence.

403.SUBARU11 1.06 2022 Subaru Outback (Smart Key)