Directed Xpresskit Solex Series Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles Directed Xpresskit Solex Series. Directed Xpresskit Solex Series 9 páginas.

Directed Xpresskit Solex Series Manual de instalación
Platform: XK09
Firmware: DLPKKIA

LED Diagnostics

LED
Status
Module Programming
Off
Solid
Flashes slowly
Solid for 3 seconds
x3
secs
and then off
Flashes, turns on
x3
solid for 3 seconds
secs
and then off
Flashes once quickly
x1
Active Ground While Running
Solid
Off
x1
Flashes for 1 second
sec
Flashes
Inactive Ground While Running
Off
x1
Flashes for 1 second
sec
Solid
Flashes
The Mobile Integration Systems
Description
Module has no power.
Data Bus type cannot be detected.
TYPE 4 ONLY
Bypass cannot be detected.
Module is already or was
successfully programmed.
Module is already or was
successfully programmed.
Module was reset.
Incorrect behavior.
Ground while running (status) off.
A command is processing.
Ground while running (status) on.
Ground while running (status) is off.
A command is processing.
Incorrect behavior.
Ground while running (status) on.
Troubleshooting
Make sure the D2D harness is connected or the
12V is present between the red and black wires.
Make sure the connections to the CAN Bus are
correct, then press the Push-to-Start button twice
to turn the ignition ON.
Make sure the connections to the EMS Com are
correct, then press the Push-to-Start button twice
to turn the ignition ON.
Normal operation.
Normal operation.
Normal operation.
Data is not processing correctly. Disconnect the
power from the module and power up.
Make sure the module was programmed, i.e. the
D2D harness is properly connected or the ground
while running (status) wire is connected (if in W2W
mode).
Normal operation.
Normal operation.
Normal operation.
Normal operation.
Data is not processing correctly. Disconnect the
power from the module and power up.
Module did not receive ground while running
(status) off. Make sure the D2D harness is properly
connected or the ground while running (status) wire
is not shorted to ground.
© 2010 Directed Electronics. All rights reserved.
Rev.: 20101210
Page 8