Directed 1475 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Directed 1475. Directed 1475 12 páginas. 4 button automatic / manual transmission remote starter

Imprimir página

Constant output

• Pressing and holding the

send a constant pulse as long as the

This constant pulse can be configured to activate certain functionalities such as rolling up

the windows – Please refer to your installer to see if your vehicle is compatible with

this option.

• Pressing and holding the

send a constant pulse as long as the

This constant pulse can be configured to activate certain functionalities such as rolling

down the windows – Please refer to your installer to see if your vehicle is compatible

with this option.

Advanced Features: Installationprogrammable

Options

The Remote Car Starter was designed with flexibility and OEM integration in mind. With its

programmable options, this unit can single-handedly control nearly any electrical system in your

vehicle.

Caution

: The programming of your system should be left to a professional. Changing any

one of the settings may affect the operation of your Remote Car Starter. Please note that the

following programmable options may require additional parts and labor.

Ignitioncontrolled Door Locks

This is an added security feature. If your Remote Car Starter was installed with the Ignition-

Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned

to the

IGNITION ON (RUN)

any door that was unlocked and opened (then closed) the next time the break pedal is pressed.

When the key is turned to the

Secure Lock

(Disabled by default.) Before your vehicle can be remote-started, the factory security system must

first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory

security systems that automatically unlock the doors when the security system is disarmed.

To keep your vehicle protected when the factory security system is disarmed for a remote start,

Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down

by remote or after its runtime has expired, Secure Lock will also rearm your factory security system

and relock the doors.

Engine Run Time

If you have a gas engine, your system can be programmed to run the engine for 3, 15, or 25

minutes (15 min default). If you have a diesel engine, it can be programmed to run the engine for 8,

20, or 30 minutes (20 min default).

Turbo Mode

If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user

leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it

is shut down by remote control), then shut down the engine.

If your vehicle has an automatic transmission, proceed as follows to set the system to Turbo Mode:

With the engine running, make sure to release the brake pedal and press the

button on the transmitter until the parking lights come ON.

User guide

button for more than 3 seconds will lock all doors and will

button for more than 3 seconds will unlock all doors and will

position while the brakes are pressed. The remote car starter will also lock

position, the doors will automatically be unlocked.

OFF

button is held down (maximum of 15 seconds).

P. 9