Directed 1475 Kullanıcı Kılavuzu - Sayfa 9
Uzaktan Çalıştırıcı Directed 1475 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Directed 1475 12 sayfaları. 4 button automatic / manual transmission remote starter
Constant output
• Pressing and holding the
send a constant pulse as long as the
This constant pulse can be configured to activate certain functionalities such as rolling up
the windows – Please refer to your installer to see if your vehicle is compatible with
this option.
• Pressing and holding the
send a constant pulse as long as the
This constant pulse can be configured to activate certain functionalities such as rolling
down the windows – Please refer to your installer to see if your vehicle is compatible
with this option.
Advanced Features: Installationprogrammable
Options
The Remote Car Starter was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system in your
vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter. Please note that the
following programmable options may require additional parts and labor.
Ignitioncontrolled Door Locks
This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned
to the
IGNITION ON (RUN)
any door that was unlocked and opened (then closed) the next time the break pedal is pressed.
When the key is turned to the
Secure Lock
(Disabled by default.) Before your vehicle can be remote-started, the factory security system must
first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory
security systems that automatically unlock the doors when the security system is disarmed.
To keep your vehicle protected when the factory security system is disarmed for a remote start,
Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down
by remote or after its runtime has expired, Secure Lock will also rearm your factory security system
and relock the doors.
Engine Run Time
If you have a gas engine, your system can be programmed to run the engine for 3, 15, or 25
minutes (15 min default). If you have a diesel engine, it can be programmed to run the engine for 8,
20, or 30 minutes (20 min default).
Turbo Mode
If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user
leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it
is shut down by remote control), then shut down the engine.
If your vehicle has an automatic transmission, proceed as follows to set the system to Turbo Mode:
1.
With the engine running, make sure to release the brake pedal and press the
or
button on the transmitter until the parking lights come ON.
User guide
button for more than 3 seconds will lock all doors and will
button for more than 3 seconds will unlock all doors and will
position while the brakes are pressed. The remote car starter will also lock
position, the doors will automatically be unlocked.
OFF
button is held down (maximum of 15 seconds).
button is held down (maximum of 15 seconds).
,
P. 9