Clarke 6462070 Instrucciones de uso - Página 12

Navegue en línea o descargue pdf Instrucciones de uso para Herramienta eléctrica Clarke 6462070. Clarke 6462070 17 páginas. Biscuit jointer

ALWAYS switch off and isolate from the mains supply by removing the plug from

the mains socket BEFORE changing the blade.

Remove the kerf guide by unscrewing the

two screws with a cross head screwdriver.

(circled in fig.3).

Place the biscuit jointer upside down on a

workbench. Remove the plastic insert disc

on the base plate by inserting a small

slotted screwdriver into the recess slot and

levering it out. (circled in fig.4).

Depress the spindle lock, and using

a peg spanner in the holes circled

in fig.5 undo the flange nut by

turning the spanner anticlockwise.

Push the body of the jointer forward

to expose the blade allowing it to

be removed.

When inserting a new blade push the

body of the jointer forward to allow

the blade to be passed over the spindle.

To ensure the blade is in the correct position over the spindle, manually turn

the blade (blade should rotate freely) the arrow on the case indicates the

direction of rotation.

Replace the flange nut by pushing down on the spindle lock button and

tightening the flange with a peg spanner.

Replace the plastic insert disc making sure that it is firmly in position and is

flush with the outer base housing.

Replace the kerf guide and tighten the two cross head screws making sure

that the slot in the kerf guide lines up with the blade and the guide does not

protrude beyond the base plate.

BLADE REPLACEMENT

- 11 -

Fig.4

Fig.3

Fig.5