Directed DIRECTECHS CHRYSLER10 Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Alarma de coche Directed DIRECTECHS CHRYSLER10. Directed DIRECTECHS CHRYSLER10 19 páginas.
Imprimir página
Wiring connections
The wiring connections listed below are specific to this firmware.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin
Color
H1/1
White
H1/2
White/Brown
H1/3
Brown/Red
H1/4
Yellow/Red
H1/5
Orange/Red
H1/6
Yellow
H1/7
White
H1/8
White/Brown
H1/9
Black
H1/10
Red
H1/11
Orange/Yellow
H1/12
Brown
Auxiliary output harness (H2), 16-pin black connector
Conn./Pin
Color
H2/1
Violet/Brown
H2/2
Yellow/Black
H2/3
Orange/Black
H2/4
Tan
H2/5
Tan/Black
H2/6
Light Green
H2/7
Orange/Green
H2/8
Orange/Brown
H2/9
Violet/Green
H2/10
Green/Black
H2/11
White/Violet
H2/12
White/Red
H2/13
Lt. Blue/Black
H2/14
Green/Red
H2/15
N/A
H2/16
Violet/Yellow
1.
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
2.
If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
6
Description
Relay 3 COM – No Connection
Relay 3 N.O. – No Connection
1
Relay 2 N.O. – (+) 12V Input
Relay 2 COM – (+) Ignition Output
Relay 2 N.C. – No Connection
Relay 1 COM – Parking Light Interrup (Vehicle Side)
Relay 3 COM – No Connection
Relay 3 N.O. – No Connection
1
(-) Ground
(+) 12V Input
Relay 1 N.C. – Parking Light Interrupt (Connector Side)
Relay 1 N.O. – (MUX) Parking Light Input
Description
(MUX) Parking Light Output
No Connection
No Connection
HS CAN Low
HS CAN High
No Connection
MS CAN High
MS CAN Low
No Connection
No Connection
2
No Connection
2
No Connection
2
No Connection
2
No Connection
2
No Connection
No Connection
1
1
1
1
1
Directed Digital Solutions CHRYSLER10
© 2020-03-09 Directed. All rights reserved.