Clarke STRONG-ARM CSA20EP Manual de instrucciones de uso y mantenimiento - Página 5
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramienta eléctrica Clarke STRONG-ARM CSA20EP. Clarke STRONG-ARM CSA20EP 17 páginas. 20 tonne hydraulic press
Imprimir página
ASSEMBLY
The press must be firmly secured to a solid level floor such as concrete, using
expansion bolts (not supplied). Holes are provided in the foot sections for this
purpose. Do not locate your press where it will be open to the elements, as
harsh weather conditions will damage the hydraulic parts.
Due to the weight of the components, we recommend that the press is
assembled by two people.
1. Attach the feet and the bottom
cross member to the side
supports, using the M12 nuts, bolts
and washers.
2. Add the foot braces to each side
using the remaining M10 nuts,
bolts and washers.
3. Bolt the cross beam to the side
supports, securing it with the M16
bolts, nuts and washers.
• Assemble loosely before
tightening all fastenings.
4. With the help of an assistant,
manoeuvre the frame to its
intended location in the
workshop.
5. Fix the 2x hooks to the moving
cross beam using the nuts
supplied. Take the two springs and
hook them to their positions on the
moving beam. Support the
moving beam and attach the
other end of the springs to the
cross beam.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5