Zanussi ZD 19/4 Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico Zanussi ZD 19/4. Zanussi ZD 19/4 11 páginas. Zanussi refrigerator user manual
Imprimir página¥
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Important: if the supply cord is damaged, it must
be replaced by a special cord or assembly
available from the manufacturer or its service
agent.
¥
There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
¥
Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
¥
If the appliance has been transported horizontally,
it is possible that the oil contained in the
compressor flows in the refrigerant circuit. It is
advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.
CONTENTS
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol
26
28
28
28
28
28
28
28
28
28
29
29
29
29
29
are recicable.
30
30
30
30
30
31
32
32
33
33
33
34
34
27