Zanussi ZOG21317XK Manual del usuario - Página 23
Navegue en línea o descargue pdf Manual del usuario para Horno Zanussi ZOG21317XK. Zanussi ZOG21317XK 28 páginas.
Imprimir página50
min. 550
110
590
min. 560
65 cm
2
x2
2
130 cm
min. 550
110
600
min. 560
2
65 cm
130 cm
x2
5
• There must be a clearance of minimum 4 mm
between the top surface of the appliance
and the inner top of the cabinet.
• When you install the appliance "built-under"
(below a hob), install the hob before the
oven unit.
• The materials must be resistant to a
temperature increase of minimum 60 °C
above the ambient temperature.
• There must be a continuous air supply
around the oven in order to not have the
oven become too hot.
• For correct operation, the oven cabinet must
have a minimum opening of 130 cm² in the
front or on the sides (a minimum of 65 cm²
for each side). The manufacturer
recommends a 130 cm² opening in the front
www.zanussi.com
548
21
558
114
16
573
594
5
3
min. 4 mm
548
21
558
114
16
573
2
594
3
for a brick cabinet and a 65 cm² opening for
each side for a wooden cabinet.
• When you install a hob above the oven,
make different electrical connections for the
hob and for the oven.
Only make connections with correct cables
for the power supplied.
Make sure that after the installation
there is easy access to the
589
594
appliance if repairs or maintenance
are necessary.
Securing the appliance to the cabinet
589
594
Electrical installation
The manufacturer is not responsible
if you do not follow the safety
precautions from the Safety
chapters.
This appliance is supplied only with a main
cable.
Cable
Cable types applicable for installation or
replacement:
H05 V2V2-F (T90), H05 BB-F
For the section of the cable refer to the total
power on the rating plate. You can also refer to
the table:
A
B
23