Zanussi ZF134UN Manual de instrucciones - Página 8

Navegue en línea o descargue pdf Manual de instrucciones para Congelador Zanussi ZF134UN. Zanussi ZF134UN 13 páginas. Freezer zf 134 un

Check the position again by slackening the screws

and pins then, once the best position has been

obtained, fully tighten all the ﬁxings.

Cover the visible part of the top bracket on the panel

with plastic cover (D), inserting it in the locations

provided in the bracket.

Once the door has been correctly aligned, tighten the

holding nuts on the ﬁxing brackets and attach the

appliance to the adjacent units and the bottom of the

work surface (Fig. 11).

If the appliance has been ﬁtted into a space 820 mm

high and the maximum height of the base plate is 100

mm, ﬁt the front cover plate by pushing the two

vertical lugs into the rectangular holes on the bottom

side of the ventilation duct until they click. The plate

can be adjusted backwards or forwards in the holes

(Fig. 12).

If the base plate is between 100 and 135 mm high, cut

it as shown in Fig. 14 and mount as described above.

If the base plate is between 135 and 170 mm high, cut

it as shown in Fig. 12.

D472

D517

820

870

170

220

D518

820

870

min.

50cm

D546

Fig. 10

Fig. 11

Fig. 12

135

185

Fig. 13

100

150