- ページ 8
冷凍庫 Zanussi ZF134UNのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZF134UN 13 ページ。 Freezer zf 134 un
ページを印刷する
Check the position again by slackening the screws
and pins then, once the best position has been
obtained, fully tighten all the fixings.
Cover the visible part of the top bracket on the panel
with plastic cover (D), inserting it in the locations
provided in the bracket.
Once the door has been correctly aligned, tighten the
holding nuts on the fixing brackets and attach the
appliance to the adjacent units and the bottom of the
work surface (Fig. 11).
If the appliance has been fitted into a space 820 mm
high and the maximum height of the base plate is 100
mm, fit the front cover plate by pushing the two
vertical lugs into the rectangular holes on the bottom
side of the ventilation duct until they click. The plate
can be adjusted backwards or forwards in the holes
(Fig. 12).
If the base plate is between 100 and 135 mm high, cut
it as shown in Fig. 14 and mount as described above.
If the base plate is between 135 and 170 mm high, cut
it as shown in Fig. 12.
20
D
D472
D517
820
870
170
220
D518
820
870
min.
2
50cm
D546
Fig. 10
Fig. 11
Fig. 12
135
185
Fig. 13
100
150