Zanussi ZHP615 Manual de instalación y uso - Página 5

Navegue en línea o descargue pdf Manual de instalación y uso para Campana de ventilación Zanussi ZHP615. Zanussi ZHP615 11 páginas.
También para Zanussi ZHP615: Manual de instalación y uso (8 páginas), Manual de instalación, uso y mantenimiento (40 páginas), Manual de instrucciones (40 páginas)

Drilling the Support surface and Fitting the Hood

• The hood support surface must be 135 mm above

the bottom surface of the wall units.

• Drill the support with a ø 4.5 mm drill bit, using

the drilling template provided.

• Cut a hole ø 125 mm in size on the support

surface, using the drilling template provided.

• Fix using the 4 screws 12a (4,2 x 44,4) provided.

• The hood can be installed either directly on the

bottom surface of the wall units (min. 650 mm

above the hob) using snap-on side supports.

• Cut a fitted opening in the bottom surface of the

wall unit, as shown.

• Insert the hood until the side supports snap into

place.

• Lock in position by tightening the screws Vf

from underneath the hood.

SCREW FITTING

SNAP-ON FITTING