Zanussi ZHP615 Installation & Use Manual - Page 5

Browse online or download pdf Installation & Use Manual for Ventilation Hood Zanussi ZHP615. Zanussi ZHP615 11 pages.
Also for Zanussi ZHP615: Installation & Use Manual (8 pages), Installation, Use And Maintenance Handbook (40 pages), Instruction Manual (40 pages)

Print Page

Drilling the Support surface and Fitting the Hood

• The hood support surface must be 135 mm above

the bottom surface of the wall units.

• Drill the support with a ø 4.5 mm drill bit, using

the drilling template provided.

• Cut a hole ø 125 mm in size on the support

surface, using the drilling template provided.

• Fix using the 4 screws 12a (4,2 x 44,4) provided.

• The hood can be installed either directly on the

bottom surface of the wall units (min. 650 mm

above the hob) using snap-on side supports.

• Cut a fitted opening in the bottom surface of the

wall unit, as shown.

• Insert the hood until the side supports snap into

place.

• Lock in position by tightening the screws Vf

from underneath the hood.

SCREW FITTING

SNAP-ON FITTING