Zanussi ZHP615 Manual de instalación, uso y mantenimiento - Página 13

Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Campana de ventilación Zanussi ZHP615. Zanussi ZHP615 40 páginas.
También para Zanussi ZHP615: Manual de instalación y uso (11 páginas), Manual de instalación y uso (8 páginas), Manual de instrucciones (40 páginas)

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to

the chimney using either a flexible or rigid pipe ø120

mm, the choice of which is left to the installer.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Remove any activated charcoal filters.

RECIRCULATION VERSION AIR OUTLET

• Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood.

• Connect the flange to the outlet on the shelf over the

hood using a flexible or rigid pipe ø120 mm.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Fix the directional grille 8 on the recirculation air

outlet using the 2 screws 12e (2,9 x 9,5) provided.

• Ensure that the activated charcoal filters have been

inserted.

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3

mm.

• When opening the sliding carriage for the first time after installing the hood, pull it out

briskly until it clicks.

Downloaded from www.vandenborre.be

Connections

ELECTRICAL CONNECTION

ø 120

12e

125