Zanussi ZHP615 설치, 사용 및 유지보수 핸드북 - 페이지 13

{카테고리_이름} Zanussi ZHP615에 대한 설치, 사용 및 유지보수 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHP615 40 페이지.
Zanussi ZHP615에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (11 페이지), 설치 및 사용 설명서 (8 페이지), 사용 설명서 (40 페이지)

페이지 인쇄

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to

the chimney using either a flexible or rigid pipe ø120

mm, the choice of which is left to the installer.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Remove any activated charcoal filters.

RECIRCULATION VERSION AIR OUTLET

• Cut a hole ø 125 mm in any shelf that may be posi-

tioned over the hood.

• Connect the flange to the outlet on the shelf over the

hood using a flexible or rigid pipe ø120 mm.

• Fix the pipe in position using sufficient pipe clamps

(not supplied).

• Fix the directional grille 8 on the recirculation air

outlet using the 2 screws 12e (2,9 x 9,5) provided.

• Ensure that the activated charcoal filters have been

inserted.

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3

mm.

• When opening the sliding carriage for the first time after installing the hood, pull it out

briskly until it clicks.

Downloaded from www.vandenborre.be

Connections

ELECTRICAL CONNECTION

ø 120

12e

125